Audited Supplier
AID150
Alarm Displayer
OEM ODM
DC18~36V
14A,18A,22A,28A
50~999KΩ
RS485 Modbus-RTU
ACREL
Fob Shanghai
China
Product Description
Product Description
AID150 Alarm And Display Device for Medical Isolated Power System
General
The alarm and display instrument AID150 is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor AIM-M10, AIM-M100, AIM-M200, and Residual current monitor AIM-R100 . It meets the requirement of GB16895.24-2005/IEC 60364-7-710:2002.
60A input Protection current transformer for isolated electrical power supply in medical locations.
ACREL isolated power panels provide isolated power to electrical systems in operating rooms and other critical care areas.
Utilizing the latest in technology, ACREL hospital isolated power supply monitor system ensures that electrical ground faults are detected and located fast and automatically.
It is CE approved,in application for IEC standards,it could be the equivalent to Bender isolated power supply IPS for healthcare facilities,and more cost-effective.
Features
1.LED (green) for indicating the operating status , 1 LED(green)for communication, 1 LED (yellow) for error, and 1 LES (red)for alarms.
2.Audible alarm (can be muted by pressing mute button).
3. AIM-M series IMD can be tested by pressing the test button of AID150.
4. Communicate with the maximum of 16 AIM-M or AIM-R series devices via RS485 bus with Modbus-RTU protocol.
5. Display the operating status with LCD.
6.Installation of embedded wall
Technical Parameters
Dimension(Unit:mm)
Display
Wiring
Typical Connection
Quotation
AID150 Alarm And Display Device for Medical Isolated Power System
General
The alarm and display instrument AID150 is designed for visual and audible indication of alarm messages from ACREL medical intelligent insulation monitor AIM-M10, AIM-M100, AIM-M200, and Residual current monitor AIM-R100 . It meets the requirement of GB16895.24-2005/IEC 60364-7-710:2002.
60A input Protection current transformer for isolated electrical power supply in medical locations.
ACREL isolated power panels provide isolated power to electrical systems in operating rooms and other critical care areas.
Utilizing the latest in technology, ACREL hospital isolated power supply monitor system ensures that electrical ground faults are detected and located fast and automatically.
It is CE approved,in application for IEC standards,it could be the equivalent to Bender isolated power supply IPS for healthcare facilities,and more cost-effective.
Features
1.LED (green) for indicating the operating status , 1 LED(green)for communication, 1 LED (yellow) for error, and 1 LES (red)for alarms.
2.Audible alarm (can be muted by pressing mute button).
3. AIM-M series IMD can be tested by pressing the test button of AID150.
4. Communicate with the maximum of 16 AIM-M or AIM-R series devices via RS485 bus with Modbus-RTU protocol.
5. Display the operating status with LCD.
6.Installation of embedded wall
Technical Parameters
| Voltage | DC18~36V |
| Consumption | ≤0.6W |
| Insulation alarm range | 50…999kΩ |
| Current alarm range | 14A,18A,22A,28A |
| Alarm mode | Audible and visual alarm |
| Alarm type | Insulation fault, overload, overtemperature, device disconnection |
| Display mode | LCD |
| History memory | 20 |
| Interface | RS485 |
| Protocol | Modbus-RTU |
| Maximum of IMDs or RCMs | 16 |
Dimension(Unit:mm)
Display
Wiring
Typical Connection
Quotation
