Advance Marine Gearbox Spare Parts Construction Gearbox Parts D300A Hcd400 Hcd600

Marine gearbox Brief Introduction:

Based on Transmission products, this product are widely used in Ship building, Engineering machinery, wind power, automotive, agricultural engineering, rail transit, special purposed industry and etc. 
Marine gearbox, hydraulic clutch, hydraulic transmission and CPP (Controlled Pitch Propeller), FPP(Fixed Pitch Propeller), tunnel thruster and azimuthing thruster, which are widely used in Fishery, Transport, Working Craft, Special boats, Ocean Large-power vessels and etc. 
Products are complete in model spectrum, power transmission capacity ranges from 10KW to 10000KW. Main products are approved by CCS, BV, RINA, GL, LR, ABS, NK, DNV, RS and KR Classification Societies. 

Guide: 
1), Perform the duties of forward & reverse, engaging & disengaging, reduction of speed as well as bearing the propeller thrust, marine gearbox can be coupled with enginer to form the complete power unit.
2), RATE in this manual indicates the proportion of the engine continuous power to the rated speed(HP/RPM). When selecting model, the actual "RATE" should be smaller than the data listed.
3), Gearbox can not be connected with engine ragidly. It must be installed on the common base with engine. If the engine mounted on the elastic base and the gearbox on the rigid base, the highly flexible coupling should be used, please contact our technology department for details.
4), Engine: Cumins, Yuchai, Weichai, Jichai, Zichai, ShangChai, SDEC, Perkin, MTU

Model: HC600A
Input speed: 1000-2100RPM
Max: 1200HP, 2100RPM
Reduction ratio: 2:1, 2.5:1, 3:1, 3.6:1, 3.9:1
Rated transmission ability: 0.657HP/RPM
Bell housing: SAE 00, SAE 0, SAE 1
Flange: SAE14, SAE 16, SAE 18, SAE21
Centre distance: 320mm
Recommend engine: Cummins KTA19-M4 (700HP), QSK19-M(750HP), QSK19-M (800HP), KTA38-M(1000HP), Yuchai 6TD800 (800HP), YC6TF1000C (1000HP)
Rated propeller thrust: 90KN