Audited Supplier
BDT
Aerospace Industry, Automotive Industry, Construction Industry, Electronics Industry, Renewable Energy Industry
Black, Blue, Gray, Green, Red, Transparent, White, Yellow
650mm
0.15-1.2mm
0.05-1.3m/Min
0-50kg
380V 50/60Hz
XWJ
16m*7m*2.8m
China
8420100090
Product Description
MLCC ceramic capacitor casting machine
Ceramic casting machine using alumina as the main raw material for ceramic casting, the first crushed powder and binder, plasticizer, dispersant, solvent mixed into a slurry with a certain viscosity, and then the slurry from the hopper flow down the scraper to a certain thickness of scraping coated with a certain thickness of the special base tape, after drying, curing from the top of the stripped off to become a raw bad tape film, and then according to the size and shape of the finished product need to be raw bad tape Then according to the size and shape of the finished product need to raw bad tape for punching, laminating and other processing, made to be sintered gross bad finished products. The casting machine has the advantages of low cost, high quality, non-toxic and simple production process.
Application range of equipment
-----------------------------------------------
Suitable for high-precision coating electronic materials processing
2. Q: What information should l let you know if l want to get a quotation?
A: 1.The size of the products (Length x Width).
2.Thickness in micron.
3.The material.
4.lt will be very useful if you can provide your bag's picture. Of course, samples will be best.
Ceramic casting machine using alumina as the main raw material for ceramic casting, the first crushed powder and binder, plasticizer, dispersant, solvent mixed into a slurry with a certain viscosity, and then the slurry from the hopper flow down the scraper to a certain thickness of scraping coated with a certain thickness of the special base tape, after drying, curing from the top of the stripped off to become a raw bad tape film, and then according to the size and shape of the finished product need to be raw bad tape Then according to the size and shape of the finished product need to raw bad tape for punching, laminating and other processing, made to be sintered gross bad finished products. The casting machine has the advantages of low cost, high quality, non-toxic and simple production process.
Technical Parameter
| Width of casting | 650mm |
| Thickness of material belt | 0.15-1.2mm |
| Speed of casting | 0.05-1.3m/min |
| Blade height control | Automatic control |
| Heating mode | Hot water and thermal oil |
| Corrective mode | Ultrasonic guiding or gas-liquid guiding |
| Tension range | 0-50kg |
| Working voltage | 380V 50/60HZ |
Application range of equipment
-----------------------------------------------
Suitable for high-precision coating electronic materials processing
1. Q: Why choose us?
A: We focus on copier and printer parts for more than 5 years. We integrate all resources and provide you with the most suitable products for long run business.
2. Q: What information should l let you know if l want to get a quotation?
A: 1.The size of the products (Length x Width).
2.Thickness in micron.
3.The material.
4.lt will be very useful if you can provide your bag's picture. Of course, samples will be best.
3.Q: How can l get the sample?
Usually we use the Courier service(UPS, TNT, Fedex, DHL, EMS), then it will take 5-7 days(depends on the distance) to reach your place.4. Q: How much is the shipping cost?
Depends on the quantity, we would be pleased to check the best way and cheapest cost for you if you tell us your planning order quantity.
Depends on the quantity, we would be pleased to check the best way and cheapest cost for you if you tell us your planning order quantity.
5. Q: How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
