Audited Supplier
JHSW-8607
Liquid
Spray
ISO14001, RoHS, ISO9001
Steel
Film Forming Matter
Conversion Type
polysv
200L Drum
A side 220 kg, B side 200 kg
Qingdao, China
3909301000
Product Description
JHSW8607 Advanced Heavy-Duty Polyurea Coating for Waterproofing and Anti-Corrosion is the state of the art 100% solids, ultra fast cure, flexible, two component aromatic pure polyurea elastomer. The system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, amine extenders and other additives. JHSW8601 has great physical property and durability, It can be used for waterproofing and anti-corrosion. Advantages:
- Curing fast, no sagging on vertical surface
- Excellent Physical Properties, high tensile strentgh and elongation at break
- Good adhension to various kinds of substrates
- Ambient insensitive, good thermal stability
- 100% Solids, No VOC's, Odorless,non-toxic
- Good resistance to a wide range of chemical attack
- Excellent Skidding Resistant, Anti-corrosion and Waterproof Properties
- Seamless, flexible, slick and non-porous
JHSW8601 Advanced Heavy-Duty Polyurea Coating for Waterproofing and Anti-Corrosion is an ultra fast cure system; it can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in:
- Metal, concrete, wood, and foam roofing
- Underground engineering
- Buried earthen containment lining (with or without geotextiles)
- New or existing sub-grade slabs, walls, etc.
- Water & wastewater lining
| Tensile Strength /MPa | ≥20 | Solids Content/% | 100 |
| Elongation/% | ≥450 | VOC | 0 |
| Tear Strength/( N/mm) | ≥75 | Gel Time/s | 8-12 |
| Shore Hardness | ≥90A | Tack Free/ s | 20~30 |
| Adhesion /(Pull off, concrete,MPa) | ≥2.5 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.04 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
