Audited Supplier
ZLT-QL1A
One Year
<500mm
<900kg
Power Cord Tester
8kg
1
Mechanical Load
Static Load
Digital
Manual Control
100-500Kg
AC380V
Check Mechanical Durabiliyy of Flexible Cable
CNAS Calibration Provided
Stainless Steel Cabinet
1 PC
in 30 Days
ZLTJC
in Plywood Carton
IEC60245-2/1998-04 figure 1, IEC60227-2/1997-11
Guangzhou, Guangdong, China
9031809090
Product Description
Flexible Cable Flexing Tester
Product details: Model ZLT-QL1A .
Model ZLT-QL1A., similar to ZLT-QL1, but adding three pulley flexing test, have a modified carrier C, For checking the mechanical durability of flexible cords and cables by bending them back and forth, This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 42,nor to cables having more than 18 cores laid up in more than two concentric layers, according to IEC60245-2/1998-04 figure 1, IEC 60245-2 figure 6 and clause 3.5 table 3. IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.
Standard Outfit:
1 carrier, with recirculating-ball bearing bushes running below the table-board on two cylindrical guideways, with mounted traveling boom,
1 geared motor with chain and connecting rod to drive the carrier with a speed 0.33 m/s±5%,
1 set per sample of bolts and nuts for fastening the pulleys,
1 set per sample of restraining clamps and stops to limit the travel of the sample,
1 set per sample of instrument terminals or - after agreement-plugs and socket-outlets for connection of sample,
1 set per sample of clamps to fasten the samples beneath the instrument terminals
Product details: Model ZLT-QL1A .
Model ZLT-QL1A., similar to ZLT-QL1, but adding three pulley flexing test, have a modified carrier C, For checking the mechanical durability of flexible cords and cables by bending them back and forth, This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 42,nor to cables having more than 18 cores laid up in more than two concentric layers, according to IEC60245-2/1998-04 figure 1, IEC 60245-2 figure 6 and clause 3.5 table 3. IEC60227-2/1997-11 figure 1, IEC60065 /1998-07 Table 11.
Standard Outfit:
1 carrier, with recirculating-ball bearing bushes running below the table-board on two cylindrical guideways, with mounted traveling boom,
1 geared motor with chain and connecting rod to drive the carrier with a speed 0.33 m/s±5%,
1 set per sample of bolts and nuts for fastening the pulleys,
1 set per sample of restraining clamps and stops to limit the travel of the sample,
1 set per sample of instrument terminals or - after agreement-plugs and socket-outlets for connection of sample,
1 set per sample of clamps to fasten the samples beneath the instrument terminals
