Audited Supplier
brood warmer
Online Guidance Support
Brood Insulation
Chicken
Electric
Electric Heating
No
No
Intelligent Control
New
Online Guidance Support
benlong
Carton Packaging
64*55*24 cm
Shandong
8436210000
Product Description
Overview:
1.Working power supply: AC220 V / 50 Hz
2.Heating power: 1.3KW (large tube) + 1.1KW (small tube)
3.Ventilator power: ≤ 1.5kw Scope of application: suitable for chicken, duck, goose, pigeon, quail, peacock, pheasant, pig, scorpion, etc.
Product features:
1.No need for manual care, using microcomputer automatic constant temperature control, temperature 0-99 ºC free adjustment, lower than the set temperature 2 ºC start heating, to achieve the set temperature automatic stop, constant temperature and high efficiency.
2.The heater adopts carbon fiber heating technology, no strong light pollution, high far-infrared radiation intensity, promoting blood circulation and healthy growth.
3.The electric heating tube can be started orderly to reduce the impact of power grid and save energy safely.
4.Four fan design, uniform air supply, more balanced temperature.
5.The installation is flexible and convenient.
6.Wireless remote control, convenient and fast, away from busy (only remote version has this function).
Introduction of control function:
1.Temperature control function
The indoor temperature is lower than the set temperature 2 ºC, and the heating is started; if the indoor temperature reaches the set temperature, stop heating.
2.Air exchange function
A.Air change control (air change period H1, air change time H2)
B.Normally open air exchange: when H1 is set to on mode, the ventilator will always work and is not controlled by temperature.
C.Normally closed air exchange: when H1 is set to of mode, the ventilator is always closed.
D.Intelligent air exchange: when H1 is set to a value of 1-24, intelligent air exchange will be started. After the H1 time of the ventilator stops, the intelligent air exchange H2 time will be realized. During the intelligent ventilation time, the ventilator will automatically start and stop to realize constant temperature ventilation within 2 degrees of room temperature until the end of the air change time, and the ventilator will stop and enter the next air exchange cycle.
E.Over temperature air exchange: when the indoor temperature exceeds the set temperature of 2 degrees, the ventilator will automatically open; it will stop when it is lowered to the set temperature. If the temperature is set to 35 ºC, when the indoor temperature reaches 37 ºC, the ventilator will automatically open and work until the indoor temperature drops to 35 degrees.
1.Working power supply: AC220 V / 50 Hz
2.Heating power: 1.3KW (large tube) + 1.1KW (small tube)
3.Ventilator power: ≤ 1.5kw Scope of application: suitable for chicken, duck, goose, pigeon, quail, peacock, pheasant, pig, scorpion, etc.
Product features:
1.No need for manual care, using microcomputer automatic constant temperature control, temperature 0-99 ºC free adjustment, lower than the set temperature 2 ºC start heating, to achieve the set temperature automatic stop, constant temperature and high efficiency.
2.The heater adopts carbon fiber heating technology, no strong light pollution, high far-infrared radiation intensity, promoting blood circulation and healthy growth.
3.The electric heating tube can be started orderly to reduce the impact of power grid and save energy safely.
4.Four fan design, uniform air supply, more balanced temperature.
5.The installation is flexible and convenient.
6.Wireless remote control, convenient and fast, away from busy (only remote version has this function).
Introduction of control function:
1.Temperature control function
The indoor temperature is lower than the set temperature 2 ºC, and the heating is started; if the indoor temperature reaches the set temperature, stop heating.
2.Air exchange function
A.Air change control (air change period H1, air change time H2)
B.Normally open air exchange: when H1 is set to on mode, the ventilator will always work and is not controlled by temperature.
C.Normally closed air exchange: when H1 is set to of mode, the ventilator is always closed.
D.Intelligent air exchange: when H1 is set to a value of 1-24, intelligent air exchange will be started. After the H1 time of the ventilator stops, the intelligent air exchange H2 time will be realized. During the intelligent ventilation time, the ventilator will automatically start and stop to realize constant temperature ventilation within 2 degrees of room temperature until the end of the air change time, and the ventilator will stop and enter the next air exchange cycle.
E.Over temperature air exchange: when the indoor temperature exceeds the set temperature of 2 degrees, the ventilator will automatically open; it will stop when it is lowered to the set temperature. If the temperature is set to 35 ºC, when the indoor temperature reaches 37 ºC, the ventilator will automatically open and work until the indoor temperature drops to 35 degrees.
