Audited Supplier
D971XP-10/16Q
Water
Manual
Wafer
Centre Sealing
Force Sealed
Normal
Low Pressure (Pn<1.6mpa)
Normal Temperature (-40°C<T<120°C)
Soft Sealed
Casting
GB/T12238 API609 BS5155 En593
Industrial Usage, Water Industrial Usage
FVT
Wooden Case Packing
DN32-DN1600
Tianjin, China
8481809000
Product Description
Product feature
1.Novel design, reasonable, unique structure, light weight, fast opening and closing
2.Small operating torque, easy to operate, labor-saving dexterity
3.Can be installed in any position, easy maintenance
1.Novel design, reasonable, unique structure, light weight, fast opening and closing
2.Small operating torque, easy to operate, labor-saving dexterity
3.Can be installed in any position, easy maintenance
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Name | Stem | Drive Type | Shaft sleeve | Sealing ring | Body | Seat | Disc |
| Material | 304Stainless steel | Q type electric actuator | Polymer composite | EPDM | Ductile iron | EPDM | 304Stainless steel |
| Product parameter | |
| Face to Face Design | ISO 5752-20/EN558-1/GB-T12221 |
| Flange Connection | ANSI Class125/150 JIS 5/10/16K AS2129 TableD/E BS4504 EN1092 PN6/10/16 |
| Working Pressure | 10/16bar |
| Testing Pressure | Shell Test:24bar / 2.4Mpa Seal Test:17.6bar/1.76Mpa |
| Working Temperature | -10°-120° |
| Nominal diameter | DN32-DN300 |
Optional material
(According to your requirements to give you different material choices)
Optional parameter
(According to your requirements to give you different material choices)
| NO. | Body | Disc | Seat | Stem | Type of Operation |
| 1 | Ductile iron | Ductile iron | EPDM | Galvanized 45 gauge steel | Stamped iron handle |
| 2 | Stainless steel 304/316/316L | Stainless steel 304/316/316L | PTFE | Stainless steel 420/431 /304/316/316L | Cast iron handle |
| 3 | Aluminium alloy | Aluminum bronze | NBR | Die cast aluminum handle | |
| 4 | Cast steel | Stainless steel sulfide polytetrafluoroethylene | Heat-resistant EPDM | Motorized | |
| 5 | Cast iron | Ductile iron covered with nylon | Wear-resistant EPDM | Stainless steel stamped handle | |
| 6 | Aluminum bronze | Ductile iron covered with vulcanized rubber | Fluorine rubber | Stainless steel cast handle | |
| 7 | Stainless steel coated with PTFE | Silicone rubber | pneumatic | ||
| 8 | Ductile iron spray epoxy resin | Hypalon rubber | Duplex stainless steel 2205/2507/1.4469/1.4529 | Worm gear box | |
| 9 | Stainless steel spraying Halar | HNBR | Worm gear box with signal | ||
| 10 | Stainless steel sprayed nano-ceramics | Neoprene rubber | Hydraulic maneuver | ||
| 11 | Stainless steel coated with tungsten carbide | Rubber without copper or zinc | Copper alloy | ||
| 12 | Duplex stainless steel 2205/2507/1.4469/1.4529 | Insulating rubber |
Optional parameter
| NO. | Temperature | Stressstress | Specification | Flange connection standard | Structural form |
| 1 | -20~80° | PN6 | GB/T 12238 | DIN2543-2545 | Center line |
| 2 | -20-120° | PN10-16 | API 609 | ANSI B16.5 | Double eccentric |
| 3 | 0-150° | PN25 | BS 5155 | JIS B2220 | Triple eccentric |
| 4 | -20-200° | JIS5K/10K | EN 593 | BS4504 | |
| 5 | 125LB/150LB | EN1092 |
Product Details
