Audited Supplier
LXPH-0
Send 3D Steel Frame Mordel for Guide Installation
Bolt Connection
Steel Column
Quality Carbon Structural Steel And Alloy Structural Steel
Hot-Rolled Steel
Wall Support
GB, ASTM, BS, SGS
Carbon Structural Steel
Q235/Q345
More Than 50 Years
EPS/Rock Wool/Polyurethane/MGO/Cement Foam Panel
Color Steel Sheet, Stainless Steel
Flat Pack, Open Top Container, by Steel Skid, etc.
H-Section Steel
Hot-Rolled Steel
Steel Column
High-Strength Steel
Q235
Steel Workshop,Platform, Walkway and Floor, House
Lixin
Seaworthy
By Customized
Foshan, Guangdong, China.
73089000
Product Description
Steel structure project is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence and so on.
Steel structure office building fabrication process:
1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;
2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)
3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)
4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)
5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.
6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )
Please check the details drawings as follow :
| General materials for whole steel construction | 1.Main steel structure frame: | Square tube,H section steel or welded by steel plate (Q235/Q345) |
| 2.Secondary steel frame: | Angle steel,round steel,round tube,square tube,C section steel (Q235/Q345) | |
| 3.Embedded pieces and accessories: | High strength bolot,purlin-screw,common screw,self-threading pin,pull rod etc. | |
| 4.Paint | Alkyd paint,zinc rich epoxy primer(anti- rust).Foreign client usually use "Jotun" and "Hempel". | |
| 5.Gutter: | Color steel sheet,galvanized steel,stainless steel. | |
| 6.Rainspout: | PVC | |
| 7.Roof panel: | Single steel sheet;EPS/rock wool/polyurethane panel,the thickness of steel sheet depended on client | |
| 8.Wall panel: | Single steel sheet;EPS/rock wool/polyurethane/Mgo panel,the thickness of steel sheet depended on client | |
| 9.Roof ridge: | Color steel sheet (0.426mm/0.476mm/0.5mm) | |
| 10.Trimming: | Color steel sheet (0.426mm/0.476mm/0.5mm) | |
| 11.Door: | Roller shutter door/silding door/steel door/stainless door/sandwich panel door etc. | |
| 12.Window: | PVC/aluminium window (silding/fix) | |
| 13.Others: | Light tile,ventilator,exhaust fan and so on. |
