Audited Supplier
WR8602JL WR8602JL-1G
CATV Equipment
Signal Transmission Equipment
CE
New
1GHz
-9 ~ +2dBm
≥ 51dB
≥ 65dB
≥ 60dB
Prevail/Fobetmoc
Neutral or According to Customer's Request
1Ghz
China
8517622990
Product Description
Feature
1. High Responsivity PIN photoelectric conversion tube.
2. Optical Receiver with Optimization circuit design, SMT production process, optimizing the whole signal path, made the photoelectronic signal transmission fluency.
3. Optical node with Professional RF attenuation chips, good RF attenuation and balanced linear, high precision.
4. GaAs amplify module, power doubler output, high gain and low distortion.
Singlechip controls the whole work, digital display the parameters, easy and intuitive operation, and stable performance.
5. Excellent AGC characteristics, when the input optical power range is -9~+2dBm, the output lever, CTB and CSO basically unchanged.
6. Reserved the data communication interface, can connect the II class network management responder, access to the network management system.
Product Process
1. High Responsivity PIN photoelectric conversion tube.
2. Optical Receiver with Optimization circuit design, SMT production process, optimizing the whole signal path, made the photoelectronic signal transmission fluency.
3. Optical node with Professional RF attenuation chips, good RF attenuation and balanced linear, high precision.
4. GaAs amplify module, power doubler output, high gain and low distortion.
Singlechip controls the whole work, digital display the parameters, easy and intuitive operation, and stable performance.
5. Excellent AGC characteristics, when the input optical power range is -9~+2dBm, the output lever, CTB and CSO basically unchanged.
6. Reserved the data communication interface, can connect the II class network management responder, access to the network management system.
Product Process
| Item | Unit | Technical Parameter | |
| Optical Parameter | |||
| Receive Optical Power | dBm | -9 ~ +2 | |
| Optical Return Loss | dB | > 45 | |
| Optical Receiving Wavelength | nm | 1100 ~ 1600 | |
| Connector Type | FC/APC, SC/APC or specified by the user | ||
| Fiber Type | Single Mode | ||
| Link Parameter | |||
| C/N | dB | ≥ 51(-2dBm Input) | |
| C/CTB | dB | ≥ 65 | Output level 108 dBμ V Balanced 6dB |
| C/CSO | dB | ≥ 60 | |
| RF Parameter | |||
| Frequency Range | MHz | 45 ~1000 | |
| Flatness in Band | dB | ± 0.75 | |
| Rated Output Level | dBμ V | ≥ 108 | |
| Rated Output Level | dBμ V | ≥ 112 | |
| Output Return Loss | dB | ≥ 14 | |
| Output Impedance | Ω | 75 | |
| Electrical control EQ range | dB | 0~10 | |
| Electrical control ATT range | dBμ V | 0~20 | |
| Reverse Optical Transmitter | |||
| Optical Parameter | |||
| Optical Emission Wavelength | nm | 1310± 10 | |
| Output Optical Power | dBm | 1 ~ 5 | |
| Optical Connector Type | FC/APC, SC/APC or Specified by customer | ||
| RF Parameter | |||
| Frequency Range | MHz | 5 ~ 65(or Specified by customer) | |
| Flatness In Band | dB | ± 1 | |
| Input Level | dBμ V | 85 ~ 90 | |
| Output Impedance | Ω | 75 | |
| General Performance | |||
| Power Voltage | V | A: AC(150~265)V; B: AC(35~90)V | |
| Operating Temperature | -40~60 | ||
| Storage Temperature | -40~65 | ||
| Relative Humidity | % | Max 95% No Condensation | |
| Consumption | VA | ≤ 30 | |
| Dimension | mm | 240(L)* 240(W)* 150(H) | |
