Audited Supplier
IH
Online
1 Years
110m-150m
>400 L/min
Motor
Single-Stage Pump
Middle Pressure Pump
Single Suction Pump
Horizontal Pump
Verticaljoint Surface Pump
Suction Centrifugal
Closed
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
1Cr18Ni9Ti
Inner/out Wash
Single Stage
Single Suction
Mechanical Seal
Support
O,a,B
BLOSSOM
Wood Case
305
China
8414100090
Product Description
Over view:
Type lH pump is single-stage and single-suction (axial suction) corrosion-resisting centrifugal pump, which pumps corrosive liquid without solid particle and glueness similar to water. The temperature of medium is - 20°C - 105°C. if necessary, cooling measure can be taken to reach a highertemperature . lt applies to petroleum , chemical, metal-lurgical, power, paper making , foodstuff , pharmaceutical, and synthetic fiber industry, etc.Type IH pump is designed by National pump In-dustry according to ISO2858 Standard and product in ISO5199/DIS, which hasmany advantages such as wider range of properties .higher efficiency , and convenient maintenance.
Range of capacity:
| Flow(Q) | 2.5-460m³ |
| Head(H) | 2.5-132m |
| Speed(n) | 2900,1450rpm |
| Power | 1.1-110KW |
| Inlet diameter | 32-200mm |
| Max. Working pressure | 1.6Mpa |
Model Discription:
IH100-80-160
100-Inlet diameter (mm)
80-Outlet diameter(mm)
The shaft seal of the pump has a variety of structural forms, the most commonly used is the built-in non-balanced single-end mechanical seal. External, unbalanced or double-end mechanical seals can also be selected according to the working conditions. The flushing cooling method can be internal flushing or external flushing. It is also possible to pretend to seal additional decorations, such as cyclones, heat exchangers, etc. For suspended particles or less corrosive media, you can also choose to seal with soft packing, external flushing or internal flushing.
According to the memory of the medium, the flow parts should be made of different materials, the most commonly used is 305-1Cr18Ni9Ti.
