Audited Supplier
SZY-136P
Submersible
Contact
Customizable
Ceramics
Good Stability and Accuracy
Stainless Steel
IP68
CE
Customized
0~1....20m
4~20mA (Default), 0~5V, 0~10V (Customized)
0.5% (0.2% Can Be Customized)
≤0.5fs%
≤0.2fs%
≤0.2%Fs/4h
≤0.04%Fs/ºC
≤0.2%Fs/Year
24VDC (Default), 12V, 5V (Customized)
0~70°c
-20~250°c
>1×10^8 Pressure Cycle (25ºC)
Various Liquids Compatible with 304
316L Stainless Steel
Aice Tech
Cartons
31*22*19 2kg
China
9026100000
Product Description
SZY-136P
SZY-136P liquid level transmitter selects pressure transmitter as the pressure measuring component. The liquid level pressure signal is collected by the collector and transmitted to the pressure transmitter, which converts the pressure signal into liquid level signal output.
The relationship between the pressure transmitter and the liquid level is: P=0.0098ρH+Pc
Where: P pressure MPa; ρ liquid density (g/cm3); H liquid surface depth (m); Pc liquid surface pressure (atmospheric pressure for 0)
Main Features:
Submersible level transmitter (gas conductive pressure type, for a variety of fuel, high temperature, corrosive liquids, sewage, etc.) the sensor part and signal processing circuit in the junction box inside, by the gas into the liquid in the gas collector contact with the medium, through the gas conductive tube will be transmitted to the sensor pressure, to avoid direct contact between the sensor and the measured medium, adapt to high temperature and strong corrosive and other occasions, effectively It solves the problem of high temperature, corrosive liquid and sewage level measurement. It is especially suitable for the measurement of high temperature, corrosive liquids and sewage.
SZY-136P liquid level transmitter selects pressure transmitter as the pressure measuring component. The liquid level pressure signal is collected by the collector and transmitted to the pressure transmitter, which converts the pressure signal into liquid level signal output.
The relationship between the pressure transmitter and the liquid level is: P=0.0098ρH+Pc
Where: P pressure MPa; ρ liquid density (g/cm3); H liquid surface depth (m); Pc liquid surface pressure (atmospheric pressure for 0)
Main Features:
- The sensor does not touch the measured medium, high reliability
- Unique conversion circuit, stable performance
- Overvoltage reverse polarity protection
- Zero fullness field adjustable
- Good stability, better than 0.2% FS/year
| Measuring range (m) | 0-1 ....... 20m |
| Output | 4-20mA (1-5V) 2-wire; 0-10mA (0-5V) 3-wire, etc.. |
| Accuracy | 0.5% |
| Nonlinearity, repeatability, hysteresis (%F-S) | 0.3 |
| Zero and sensitivity temperature drift (%/°C F-S) | ≤0.03 ≤0.05 |
| Zero point drift (%/F-S4h) | ≤0.3 ≤0.5 |
| Long-term stability (%F-S/year) | 0.2 0.3 |
| Operating voltage (V) | +24 calibration (+18 to +36) |
| Compensation temperature (ºC) | 0~70 |
| Operating temperature (ºC) | -20ºC~250 |
| Overload capacity (%) | 300 |
| Life expectancy | >1×108 Pressure cycle (25ºC) |
| Frequency response (Hz) | >1000 |
| Measurement media | High-temperature liquids, corrosive liquids, sewage, etc. |
| Diaphragm material | 316L stainless steel |
| Protection level | IP67 |
| Housing material | 1Cr18Ni9Ti |
| Interface | Input split type |
