Audited Supplier
250
Chiller
Galvanized Sheet
Ultrahigh
380/400 VAC
Low
Mechanical Engineering
Floor Standing
10~15 years
ISO, CE, CCC
New
R410A, R134A, R22
50Hz/60Hz
Plywood or Stretch Film Packing
150 Kw to 1180kw
Screw or Scroll Type
Large Diameter Low Nose Axial Fan
ALK or OEM brand
Palletizing
size: 3300mm*2160mm*2450mm
Qingdao China
84186920
Product Description
AIR COOLED SCREW CHILLER UNIT
AIR COOLED SCREW SCROLL CHILLER FEATURES
STRUCTURE
The master module can work independently or together with up to 11 slave modules, cooling capacity from 150 to 1180kW.
HERMETIC COMPRESSOR
3-phase Semi-hermetic screw compressor, with built-in thermal overload cut-out , mounted on rubber vibration dampers.
AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP55,F class provided with a protective outlet grille.
EVAPORATOR
Evaporator built with high efficiency tube in tube type or shell and tube heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.
HEAT RECOVERY
The user needs to be able to realize the full 0-100% condensing heat recovery and recycling too cool heating
HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
CHILLER Unit Pictures
TECHNICAL DATA
SOME PROJECT LIST
Cooling Capacity 150 ~ 1180kW / 43 ~ 337 Ton
Power supply optional 380V/50HZ/3PH;400V/50HZ/3PH;230V/60HZ/3PH;460V/60HZ/3PHAIR COOLED SCREW SCROLL CHILLER FEATURES
STRUCTURE
The master module can work independently or together with up to 11 slave modules, cooling capacity from 150 to 1180kW.
HERMETIC COMPRESSOR
3-phase Semi-hermetic screw compressor, with built-in thermal overload cut-out , mounted on rubber vibration dampers.
AXIAL FAN
External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP55,F class provided with a protective outlet grille.
EVAPORATOR
Evaporator built with high efficiency tube in tube type or shell and tube heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Condenser built with seamless internal screw thread copper tubes mechanically expanded into blue wave hydrophilic aluminum fins.
HEAT RECOVERY
The user needs to be able to realize the full 0-100% condensing heat recovery and recycling too cool heating
HYDRAULIC CIRCUIT
Hydraulic circuit built with galvanized pipe, complete with water discharge connection for heat exchanger and flange type hydraulic connectors in two directions easy for connections from both sides of the units.
ELECTRIC PANEL
Electric panel consist of: Compressor contactor, fan motor contactor, compressor protection breaker, fan protection breaker, phase sequence relay and microprocessor with function display (display only for master/packaged unit)
Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
CHILLER Unit Pictures
TECHNICAL DATA
SOME PROJECT LIST
| PROJECT TIME | EQUIPMENTS QUANTITY | PROJECT LOCATION |
| 2018 | 80 UNITS | FOR TOTAL SALSE PROJECTS |
| 2019 | 150 UNITS | FOR TOTAL PROJECTS |
| 2020 | 100 UNITS | FOR TOTAL SALSE PROJECTS |
