Audited Supplier
Features:
1. Integrated design: The filtering, lubrication, and pressure regulating functions are integrated into one component, with a compact structure and saving installation space.
2. The pressure loss is low and the efficiency of water separating is high.
3. The filter precision includes 5µm and 40µm(optional).
4. High filtration precision: It can effectively filter out water, oil, solid particles and other impurities in the compressed air to ensure the cleanliness of the air source.
5. The filter cup is designed to be transparent for observing the volume of water and oil.
6. Multiple protection: It can effectively filter impurities in the air, prevent water, oil, solid particles, etc. from entering pneumatic components, and at the same time lubricate pneumatic components to extend their service life.
7. Extend the life of the equipment: Filter out particles in the air, reduce wear and tear on the equipment, and extend the life of the equipment.
8. Improved equipment efficiency: Clean air improves the efficiency of equipment operation.
9. Stable output pressure: The pressure regulating valve can accurately adjust the output pressure to ensure the normal operation of downstream equipment.
10. Improve system reliability: Through purification and lubrication, the wear of pneumatic components is reduced and the reliability of the system is improved.
11. High pressure regulation accuracy: It can accurately adjust the output pressure to ensure the normal operation of downstream equipment.
12. Reduced Maintenance: Pneumatic components will need less maintenance due to reduced wear and corrosion.
Main Products
Our main products cover air source treatments (regulator, precision regulator, filter, lubricator, filter & regulator, and F.R.L combination), solenoid valve, pneumatic fittings and other accessories etc.
Preparation
1. The assembly of all calibration shall meet the maximum flow requirement.
2. Please clean the port and fitting before installation, it will effectively avoid bringing dust to the air path.
3. Pay attention to the direction of airflow and an arrow pointing on product body if correct, minding port and thread size if match.
Pressure Adjustment
1. Pull up the knob of pressure gauge, rotate:
If you do clockwise rotation, pressure will rise steadily.Pressure will down when you rotate counterclockwise.
2. Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.
Dial Reading
Make sure that the pressure gauge is tightly installed on the main body, and pay attention to whether the reading rises and falls smoothly while adjusting pressure.
Drainage
Drainage column will automatic excrete if there is no pressure,and it will close during the air flow passing. When the water level is beyond upper limit, drainage is necessary, otherwise that will cause poor dehumidification.
Oil Adjustment
Rotate the needle valve in the "+" direction to increase the oil absorption speed, and it will slow down or stop when you rotate to "-" direction.
Refueling
Rotates refueling screw clockwise, oil you add should not exceed 80% of bowl. After refueling, please tighten the refueling screw.
Why choose us? What can we do for you?
1. Founded in 2011 and experienced in the field of producing pneumatic products for 13+ years.
2. We have strong production capacity, over 100000 pcs/month.
3. We have rich experience for offering OEM/ODM service.
4. We have strict quality control process with quick response of after sales service.
5. Management system certification: ISO9001,CE
6. We have 10+ technical experts for researching and developing.
7. Sales network expands from domestic sales to all over the world.
FAQ:
Q1:Are you a manufacturer or trading company?
A: We are a professional pneumatic components manufacturer, we have our own factory and marketing department, technical team and R&D department.
Q2: How do you ensure your product and service quality?
A: Provide customers with "high precision, high efficiency, high-quality" products is our mission. Every product is carefully tested before packing and shipping. Our team is always here for you to contact and discuss, any questions, just feel free to let us know.
Q3: What is your sample policy?
A: We can offer some models sample for free, it depends on the product type, but the freight cost should be paid by you, pls contact us to talk about the sample.
Q4: How can l make payment?
A: We accept T/T bank transfer, Western Union, L/C, Paypal etc.
Q5: What is your minimum order quantity?
A: All MOQ depends on the product. Please feel free to check with us for specific items.
Q6: What about delivery time?
A: It depends on the product and quantities, generally speaking, it takes about 2 to 4 weeks.
Q7: Do you accept OEM business?
A: Sure. We can do OEM, we already OEM for many domestic and international customers.
Q8: What about shipping?
A: We recommend to ship small batch by air or express, and bulk order by sea.
Q9: What's your company policy to be your distributor?
A: We have different distributor policies for different market, please don't hesitate to contact us for detailed discussion. And we welcome you visit our factory and to talk face to face.
