Audited Supplier
Safety Instructions:
Before use check the saw for any mechanical damage. Ensure that the saw blade is not blunt, has no broken teeth and is correctly installed.
Ensure the air vent of the motor is kept clean and clear from dust to prevent overheating which may cause damage to the motor.
During use do not overexert or apply pressure when the saw blade is moving.
If the blade should become lodged in the plaster, switch the unit off and remove slowly.
During use the motor will heat up, if the outer shell becomes excessively warm turn the motor off to avoid overheating and allow the motor to cool.
Please switch the motor off if any abnormal noise or excess vibration occurs during use.
Do not switch the power on and off frequently as this will cause damage to the motor.
Clean the saw after use and store in a dry place to avoid corrosion.
Specifications:
Rated power: 10W
Battery capacity: 2600 mA
Use time: 60-80 minutes
Charging time: 3 hours
Water bottle capacity: 800ml
Product size: 25.5*9*23cm
Charging method: USB data cable
simply repeat these steps in reverse order.
| basic information | Rated power | 10W |
| Water bottle capacity | 800ml | |
| Charging method | USB data cable | |
| Rated voltage | 110-240V | |
| Sustainable use time | 60-80 minutes | |
| Charging time | 3 hours | |
