Audited Supplier
Bare
Stranded
Overhead
Aluminum
Bare
Bare
Round Wire
Overhead
ISO9001, CE, CCC
Jinshui
JINSHUI
Drum
1.1*1.1
Zhengzhou Henan
4107961636
Product Description
All Aluminium Alloy Stranded Conductor/ Bare Conductor
Brief Description:
This conductor is made from aluminium-magnesium
silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical
properties after treatment. These conductors are generally made out of aluminium alloy 6201.
AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR CONDUCTOR on equal diameter basis.
Applications:
AAAC aluminum alloy conductors are extensively used for overhead distribution and transmission lines
adjacent to ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.The inductive effect of the ACSR's steel core is eliminated, hence increasing the operating efficiency of the line.
Features and Benefits:
Aluminum alloy conductors have a number of advantages over the use of the ACSR or all aluminum
conductors. Lower power losses than for equivalent single aluminum-
layer ACSR conductors. (The inductive effect of the steel core in the ACSR is eliminated).
• Simpler fittings than those required for ACSR.
• Excellent corrosion resistance in environments conducive to galvanic corrosion in ACSR.
• Strength and sag approximately the same as for equivalent 6/1 and 26/7 ACSR conductors.
• Outside diameters are the same as for standard ACSR conductors, permitting interchangeability of fittings.
• Greater resistance to abrasion than that for 1350 wires in all-aluminum or ACSR conductors.
Key Benefits:
· High tensile strength as compared to AAC conductor.
· Higher conductivity as compared to ACSR conductor.
· Better corrosion resistance than ACSR conductor.
Physical contents of alluminium alloy :
· Density - 2.70 kgm/dm3 at 20°C
· Coefficient of Linear Expansion - 23 x 10-6 / °C
· Resistivity - 0.0326 Ohms mm2/m at 20°C
· Constant Mass Temperature Coefficient (a) - 0.00360/ °C
· Material - Heat treated Al. Mg. Si. Alloy
Brief Description:
This conductor is made from aluminium-magnesium
silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical
properties after treatment. These conductors are generally made out of aluminium alloy 6201.
AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR CONDUCTOR on equal diameter basis.
Applications:
AAAC aluminum alloy conductors are extensively used for overhead distribution and transmission lines
adjacent to ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.The inductive effect of the ACSR's steel core is eliminated, hence increasing the operating efficiency of the line.
Features and Benefits:
Aluminum alloy conductors have a number of advantages over the use of the ACSR or all aluminum
conductors. Lower power losses than for equivalent single aluminum-
layer ACSR conductors. (The inductive effect of the steel core in the ACSR is eliminated).
• Simpler fittings than those required for ACSR.
• Excellent corrosion resistance in environments conducive to galvanic corrosion in ACSR.
• Strength and sag approximately the same as for equivalent 6/1 and 26/7 ACSR conductors.
• Outside diameters are the same as for standard ACSR conductors, permitting interchangeability of fittings.
• Greater resistance to abrasion than that for 1350 wires in all-aluminum or ACSR conductors.
Key Benefits:
· High tensile strength as compared to AAC conductor.
· Higher conductivity as compared to ACSR conductor.
· Better corrosion resistance than ACSR conductor.
Physical contents of alluminium alloy :
· Density - 2.70 kgm/dm3 at 20°C
· Coefficient of Linear Expansion - 23 x 10-6 / °C
· Resistivity - 0.0326 Ohms mm2/m at 20°C
· Constant Mass Temperature Coefficient (a) - 0.00360/ °C
· Material - Heat treated Al. Mg. Si. Alloy
| All Aluminium Alloy Conductors ASTM B 399 | ||||||
| AREA | Stranding and wire diameter | Approx. overall diameter | Weight | Nominal Breaking Load | Nom. DC resistance at 20 Deg. | |
| Nominal | Actual | |||||
| AWGorMCM | (mm2) | (mm) | (mm) | (kg/km) | (kN) | (ohm/km) |
| 6 | 13.3 | 7/1.554 | 4.67 | 37 | 4.22 | 2.5199 |
| 4 | 21.15 | 1/1.961 | 5.89 | 58 | 6.71 | 1.5824 |
| 2 | 33.63 | 7/2.474 | 7.42 | 93 | 10.68 | 0.9942 |
| 1/0 | 53.48 | 7/3.119 | 9.36 | 148 | 16.97 | 0.6256 |
| 2/0 | 67.42 | 7/3.503 | 10.51 | 186 | 20.52 | 0.4959 |
| 3/0 | 85.03 | 7/3.932 | 11.8 | 234 | 25.86 | 0.3936 |
| 4/0 | 107.23 | 7/4.417 | 13.26 | 296 | 32.63 | 0.3119 |
| 250 | 126.66 | 19/2.913 | 14.57 | 349 | 38.93 | 0.2642 |
| 300 | 152.1 | 19/63.193 | 15.97 | 419 | 46.77 | 0.2199 |
| 350 | 177.35 | 19/3.447 | 17.24 | 489 | 52.25 | 0.1887 |
| 400 | 202.71 | 19/3.686 | 18.43 | 559 | 59.74 | 0.1650 |
| 450 | 228 | 19/3.909 | 19.55 | 629 | 67.19 | 0.1467 |
| 500 | 253.35 | 19/4.120 | 20.6 | 698 | 74.64 | 0.1321 |
| 550 | 278.6 | 37/3.096 | 21.67 | 768 | 83.80 | 0.1202 |
| 600 | 303.8 | 37/3.233 | 22.63 | 838 | 91.38 | 0.1102 |
| 650 | 329.25 | 37/3.366 | 23.56 | 908 | 97.94 | 0.1016 |
| 700 | 354.55 | 37/3.493 | 24.45 | 978 | 102.20 | 0.0944 |
| 750 | 380.2 | 37/3.617 | 25.32 | 1049 | 109.60 | 0.0880 |
| 800 | 405.15 | 37/3.734 | 26.14 | 1117 | 116.80 | 0.0826 |
| 900 | 456.16 | 37/3.962 | 27.73 | 1258 | 131.50 | 0.0733 |
| 1000 | 506.71 | 37/4.176 | 29.23 | 1399 | 146.10 | 0.0660 |
