Audited Supplier
YYRS
Aluminium
Mobile
Tower Scaffolding
Combined Scaffolding
Floor Type Scaffolding
Full Scaffolding
External Scaffolding
Attached Lifting Scaffolding
Scaffolding System
Installation Scaffold
Hot Dipped Galvanized
En12811
Aluminium Scaffolding Tower
Manual
Yue Yang
Pallet
Ringlock System
Jiangsu, China
7308400000
Product Description
Aluminium Cuplock Ringlock Scaffolding System for Aerial Work Construction
1-High Grade Aluminium takes heavy loading capacity, get to 4.4kN.
2-Light Weight makes high work effective.
3-Special design for aerial using, easy installation, less labour force, economic cost.
4-More items for more possibilities.
5-Aluminium ringlock scaffolding tower and more sizes can be customized.
6-Sample Model left: 5m(H)X2.07m(L)X1.40m(W)
2-Light Weight makes high work effective.
3-Special design for aerial using, easy installation, less labour force, economic cost.
4-More items for more possibilities.
5-Aluminium ringlock scaffolding tower and more sizes can be customized.
6-Sample Model left: 5m(H)X2.07m(L)X1.40m(W)
Detailed Photos of Ringlock Scaffolding System
Installation Details of Ringlock Scaffolding System
| Put adjustable base jack on the ground, followed by the base collars, with the thinner tube downwards onto the adjustable base jack. The recommended height for the adjustable base jack extension is 20 cm. Begin erecting at the ground's highest point. | In the first bay connect the single ledger (A)m and single ledgers (B)m to the small holes of the base collars. Check the assembled frame and ensure that it is level and square. Note: Anchor the base jack to the ground. |
| Place the standards 2.0m over the adjustable base jack onto the base collars. | Install the second floor single ledgers at a 2m height (4 rosette spacings). The specifications of Single ledgers follow the first floor bays. |
| Put the stairway to the section you want at the 2.0m height. | Install the diagonal bracing according to plan.Meanwhile, secure all the wedges of single ledgers and diagonal braces with hammer. |
| Install the internal handrail on to stair way. | Installing the plank beside the stairway. Lock the planks to the single ledgers with the lock plate at the back of planks. |
| Repeat the step 1-4 for upper section install.TIP: When putting the standards on top of each other, turn them so that they can(if necessary) be connected to one another with locking pins. | Install the second stairway from the second floor to third foor. Repeat the step 5-6 to install the handrail and planks.Flow up with others parts as plan if have customize design. |
Packing & Shipping of Ringlock Scaffolding System
Product process of Ringlock Scaffolding System
Company Profile
