Audited Supplier
French Oil discharge valve
The French unloading valve is installed on the bottom side of the tank truck, which is suitable for non-corrosive pipeline transmission opening and closing control. It has the characteristics of reasonable material configuration, compact structure, light weight, small volume and easy to use. With a limit device, safe and reliable. The passage of the fluid can be observed through the glass sight glass.
Materials:
Body: low pressure casting
Shaft: stainless steel
Seal: butyl cyanide rubber
Spring: Steel
Hardware: stainless steel
Advantages:
Lightweight die-cast construction, with strength, anodized treatment.
The tubular mirror design makes it easier to monitor media flow during the day and at night
Grid type structure, easy to connect quickly
Simple operation and fast coupling
Size | DN80/3" | DN65/2.5" |
Working Pressure | 0.3MPa | |
| Control mode | Manual | |
Connect way | flange | |
Temperature | -20~+70ºC | |
| Medium | Diesel, gasoline, kerosene | |
| Weight | 4kg | 3.5kg |
If you are not sure which model meets your requirement.
1. About Flow meter---what is the medium that you need to measure? What is the flow rate? Pipe diameter?
2. About Pump---what is the medium that you need to pump? Diesel, petrol, lpg gas or others? What is the pipe diameter, flowrate, power etc. ?
3. About Nozzle---what is the medium that you need to pump? What is the size ? thread NPT or BSPF ?
4. About LPG compressor---what is the intake pressure, discharge pressure, flowrate, power, voltage etc.? What is the volume of the flow meter?
Please contact us:
Name: Rachel Chi
