Audited Supplier
Aluminum cut wire shot is widely used in surface treatment such as descaling, burr removing, elimination of surface defects, internal stress relief, etching, matte finish, leveling, strengthening and rust prevention before applying in the metal die castings, precision castings, hardware & tools, machinery manufacturing, auto parts, instruments & meters, pumps and valves industries.
0.6, 0.8, 1*1, 2*2, 3*3, 4*4,5*5, 6*6, 9.5*20, 12*20 mm
Advantage:
1. Aluminium Cut Wire Shot long life time
2. High-quality and competitive/best price
3. Ceritificate: ISO9001:2008
4. Density: 8.9 g/cm3
5. Hardness: 110~300HV
6. Less Dust
7. Shape: Cylindrical
Cut Wire Shot Applications
Peening
Cut wire shot is a natural for shot peening because the peening process requires a round, whole bodied shot that resists rapid change in size and weight so it delivers constant intensity. This quality is assured in cut- wire shot because the wire from which it has been produced is heat treated and cold drawn to achieve hardness and homogeneity. This, together with the balanced chemical properties and complete solidity of every piece, insure that cut- wire shot will not fracture in use. It wears down gradually and lives for many cycles in a peening operation. Cut- wire shot maintains its peening intensity longer than other types of shot and thus reduces cost. Tests have shown cut- wire- peened parts have a greater fatigue life than the same part peened with cast shot. This demonstrates that media uniformity is extremely critical for peening.
Cleaning
The larger husky bodies of cutwire shot can clean fast. That is why cut- wire is used to clean all types of metal. A cut-wire cleaned surface is exceptionally bright and smooth. Our pellets are whole-bodied shot with no scale or oxides present. They therefore, create no dust and leave the surface clean.
Tumbling
Wecan be used for tumbling and vibratory ing. The cylindrical form of pellets offers superior penetration into fillets or recessed areas so important in this work. Longer lengths are available where deep penetration is required. Where magnetic separation is desired, pellets of brass or type 316 stainless and zinc may be used. Sizes available range from wire diameters of .012 inches (.30mm) to .125 inches (3.17 mm) and lengths up to .5 inch (12.7 mm).
| Product | Grade | Density | Hardness | ||||||
| Al | Mg | Si | Cu | Zn | Mn | ||||
| Aluminum cut wire | A1070 | 99.7% | / | 0.2%max | 0.04%max | 0.04%max | 0.03%max | 2.7g/cm3 | 65-125Hv |
| Aluminum cut wire shot | A1050 | 99.5% | / | 0.25%max | 0.05% | 0.05%max | 0.05%max | ||
| 5056 | 93-94% | 4.5-5.6% | 0.3%max | 0.1% | 0.1%max | 0.2% | |||
| 1100 | 99% | / | 0.3%max | 0.2%max | 0.05%max | 0.05%max |
Q1:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q2:Can you send samples?
A:Of course, We can provide you samples for free, you just need to bear the courier costs.
Q3:How long does your delivery time take?
A:In general, our delivery time is within 15-20 days, and may be delayed if the demand is extremely large or special circumstances occur.
Q4: Does the product have quality inspection before loading?
A: Of course, all our products have undergone strict quality inspection before packing, and unqualified products will be eliminated.
Q5:What's your payment term?
A:Usually we do T/T and L/C or combined.
Q6:Can you provide the product catalog?
A:Yes we can send you a word/PDF document of our catalog with attachment in Email.
