Audited Supplier
Push-in DOT Air Brake Fittings
are for use in all vehicle airbrake systems and cabin aircontrol systems. Also as a connector on all air operated systems as applicable to suspension, steering, engine, transmission and auxiliary mechanisms.
Technical data:
Operating Medium: Compressed air
Working pressure: 0 to 300* psi (0 to 21 bar) * Depending on tubing limitations.
Working temperature: -30 to 250ºC
Advantage Of D.O.T. Push To Connect Fittings:
1.Fast assembly: No tools required. Simply push tubing in. Saves up to 75% of assembly time compared to standard air compression fittings.
No loose parts to handle.
2.Fast disconnect: Hold the collet collar with two fingers and pull out tube. No tools required.
3.Reusable: Can be connected and disconnected several times.
4.Reliable sealing: Using recommended tubing, full sealing is guaranteed.
5.Versatility: Viton (FKM). Secure Tube Retention. Pulling on tubing only serves to tighten the connection.
Pre-Applied Teflon based pipe sealant on all male pipe threads, saving customer additional labor.
Full Flow Design, provides more flow area than conventional fittings with internal tube supports even in the swivels.
DOT Fittings are constructed with an all brass captive eyelet which allows for maximum flow. The brass captive eyelet with extended length is floating and has a machined top end radius for easy instal-lation of tubing. All male threads have a pre-applied Teflon based pipe sealant to provide for easy assembly and leak proof seal.
WE ALWAYS BELIEVE:
THERE ARE NO WRONG CUSTOMERS,ONLY POOR SERVICES!!
