Audited Supplier
YSAMD-200
Amphibious Multipurpose Dredger
Diesel
Hydrocyclone
CTS
Customized
New
Three Years
Three Years
240kw
40day
Mud Pump
Rake
Basket
Scissors
Pile Driver
yongsheng
Container
10.5m*3.5m*1.15m
China
89051000
Product Description
MultiPurpose Cutter Suction Dredge / waterway and land amphibious dredger
1. Basic parameter :
Yongsheng Amphibious cutter suction dredger includes functions of cutter suction, digging, grabbing, piling, weeding etc. as a whole, can be used in shallow areas such as, coastal beach, inland lake, city rivers, channel and reservoir, industrial settling pond, can be used for dredging, reclamation, desilting, weeding and piling etc.
Amphibious Multipurpose Dredger:
Crawler amphibious dredger:
Spiral amphibious dredger:
We configure the power of the mud pump for the amphibious dredger according to the customer's on-site needs. You can choose a 6-inch pump with a flow rate of 200m3; You can also choose an 8-inch pump with a flow rate of 600m3; The large mud pump is 10 inches in size, with a flow rate of over 900 cubic meters, and the diesel engine power will also reach 240KW.
| (1)Total length | 15.0m(Including excavation arm) | When the excavation arm is lifted |
| (2)Total width | 5.3m(Including buoyancy tank) | |
| (3)Molded depth | 1.26m | |
| (4)Draft | ~0.7m | |
| (5)Maximum excavation depth | Backhoe dredging mode:5.3m Cutter suction dredging mode:6.3m Grab dredging mode:5.8m | |
| (6)Diameter of twisted suction sand suction pipe | 250mm | |
| (7)Diameter of twisted suction sand discharge pipe | 250mm | |
| (8)Discharge distance of cutter suction dredging | 300~600m | |
| (9)Total flow rate of dredging pump | 900 m³/hr(10 inch) | maximum |
| (10)Total installed power | 230 KW/312HP | Weichai |
Operating system: Fully hydraulic pilot system, easy to operate and efficient. It is also equipped with GPS and depth gauge to assist in precise operation. There are also comfortable designs such as air conditioning in the operating room.
Powerful function, equipped with: 600 l bucket, cutter pump, clamshell bucket,rake.
Powerful function, equipped with: 600 l bucket, cutter pump, clamshell bucket,rake.
Amphibious Multipurpose Dredger Advantage:
1 Disposal easily, no need for crane, can move on a road and get in and out of the water without too much cost
1 Disposal easily, no need for crane, can move on a road and get in and out of the water without too much cost
2 Work stable, with spuds and support legs to keep balance
3 One person operation. Workers with excavator operation skills can operate easily after a little training
4 Lights on dredger are available to make sure constant work for maximum efficiency
5 Self-propulsion with propellers
6 High efficiency, with submersible mud pump and cutter compound equipment ensuring high slurry density (around 25%)
7 Can be used in closed channel, shallow areas, ind7ustrial pond, reservoir etc. where other dredgers can not work
8 Strong marine steel construction
9 Hydraulic track drive through hydraulic motors.
10 Low ground pressure and good clearance on terrain, marches and swamps during on-land drives
There are many types of amphibious dredgers, such as Crawler amphibious dredger, Spiral amphibious dredgers, etc. We can choose according to our own working conditions.As a professional manufacturer of cutter suction dredgers, please trust our strength. Welcome to visit and inspect China.
