Audited Supplier
GENERAL INFO:
FX3U-26MR-E Relay 16DI/10DO, 2AI/2AO Ethernet Port
FX3U-26MT-E Transistor 16DI/10DO, 2AI/2AO Ethernet Port
Features
MCU adopts ARM32-bit industrial processor, which is suitable for small PLC for industrial automation applications
Compatible with most commands of Mitsubishi FX3U, supports GXworks2/GxDeveloper programming; comes with independent programming port
All IO ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences. The input supports positive/negative triggering, which is convenient to use
One 10/100Mbps network port, support MC and MODBUS TCP protocol communication
High-speed counter function
Support 2 channels of 100K high-speed pulse output
Built-in analog input and output channels
The power circuit adopts anti-reverse connection and anti-surge design
All key electronic components are imported from major brands, and the warranty is 1 year
Widely applicable to signal acquisition and control of industrial field equipment
Basic functions
1. Basic command speed: 0.18us/step, fast command execution speed
2. Large program capacity: the program memory size is 0~16000 steps, with complete basic/application instructions
3. It has powerful functions such as clock perpetual calendar, RUN/STOP switch, A/D, D/A, firmware upgrade, etc.
4. DIN rail installation, easy maintenance
Communication Function
1. The programming port is the standard RS422 S terminal. In addition, the programming port can also communicate with the touch screen that supports the FX3U PLC protocol.
2. Comes with RS485 communication port, supports MODBUS RTU communication protocol, supports FX3U PLC protocol touch screen communication
3. Comes with 1 RJ45 network port, supports MODBUS TCP communication protocol, and supports Mitsubishi GX Works2 or above programming
The software uses the network port to communicate with the PLC
High-speed counter function
1. Support 6 channels (X0~X5) single-phase high-speed pulse counting, 2 channels AB phase counting, of which 4 channels (X0~X3) 100K single-phase
Counting, 2 channels (X4~X5) 40K pulse counting
Pulse output function
1. ETH-AMX-FX3U-26MT supports 2 channels (Y0~Y1) 100K high-speed pulse output
Main specifications
Model: FX3U-26MR/T-E
Digital input
input points: 16
Input signal type: switch contact signal or level signal, support
positive and negative trigger
Input signal voltage: DC 18~28V
Insulation circuit: optocoupler isolation
Digital output
Output points: 10
Output type: Relay
Contact capacity: 30VDC/5A, 250VAC/5A
Insulation circuit: mechanical insulation
Analog input
Input points: 2
Input type: voltage/current, DIP switch switch input type
Input range: 0~10V/0~20ma
Conversion accuracy: 12 bits
Analog output
Output points: 2
Output type: voltage, current
Output range: 0~10V/0~20ma
Conversion accuracy: 12 bits
High-speed counter
Input points: 6 channels (X0~X5) single phase, 2 channels AB phase
Pulse frequency: single-phase 4 channels 100K (X0~X3), 2 channels 40K (X4~X5)
Input signal voltage: DC 18~28V
High-speed pulse output
AMX-FX3U-26MR-E
Number of output points: No high-speed pulse output
Pulse frequency: no high-speed pulse output
AMX-FX3U-26MT-E
Number of output points: 2 channels (Y0~Y1)
Pulse frequency: 100K per channel
Communication Interface
RS485: 1 channel, support MODBUS RTU, FX3U PLC communication protocol
RS422: 1 channel, supports uploading, downloading, and monitoring
RJ45 1 channel, 10/100Mbps communication rate, support MODBUS TCP, Mitsubishi FX3U built-in TCP/IP protocol
Power Supply
Power supply: DC24V, terminal access; with anti-reverse protection
Power consumption: 2W~4W
Surge protection: 600W
Structure and environment
Size (mm): 129*86*50
Installation method: 35mm DIN rail
Working temperature: 0ºC~+50ºC (no freezing)
Working humidity: 10~80%RH (non-condensing)
