Audited Supplier
PDG-XXGF
AC Three Phase
Biogas
CE, ISO
50-200kW
Standard
Deutz or Cummins, Styer, Ricardo
Brushless Alternator
Natural Gas Biogas Fuel
Electric Start
Oil Field, Factory etc
Parallel Grid System
CHP
Customers' Requirements
Deepsea, Smargen
15 Years
PULITA ENERGY
Plywood Package by Seaway
Engine, Alternator, automatic control panel
China
85022
Product Description
Anaerobic digestion plant used 5mw ac biogas generator
Related products:
Related products:
Requirments for biogas
1.Methane should be at least 50%
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm
Models list
1.Methane should be at least 50%
2.The natural gas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 3-100KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm
Models list
Model of genset | PDG-XXGF |
Model of engine | Deutz,Cummis,Man,Weichai |
Type | Four Stroke,Spark Plug Ignition |
Model of alternator | Faraday,Stamford,Siemens |
Rated speed(r/min) | 1500/1800/1000 |
Rated power(kW/kVA) | 10-1200kW |
Cylinder numbers and Type | 4 cylinders in line,6 Cylinders in line,6V |
Rated voltage(V) | 400V/230V |
Rated frequency(Hz) | 50/60 |
Rated power factor | 0.8 lagging |
Voltage regulation | Automatic |
Supply connecting | 3 phase 4 wire |
Governor | Electric governor |
Control model | Remote electric control, Hand control |
Starting method | 12V DC electric starting motor |
Cooling method | Water cooling system |
