Audited Supplier
9LDC4288
New
Grey
Breeding, Feeding
4 Tiers
Hot Galvanized
Chicken, Bird
4/5/6/8 Tiers
on-Site Installation with English Engineer
Practical, Durable, Cheap
Fully Automatic
128/144 Birds Per Unit
1200mm*1560mm*2740mm
600mm*600mm*445mm
15~20 Years
Hengin
Standard Packing
128/144 birds per unit
China
84362900
Product Description
Animal Husbandary Battery Chicken Layer Cage with Auto Egg Collection
Our Products
1. H type 4 tiers layer cage size
2.The H frame chicken layer cage system is Highest Automatic Equipment for Layer Farms, it includes:
1). Cage and Frame
The distance between each legs is 1206mm, the tier height is 590mm, and the width (including feeding troughs) 1560mm.
Such cages have larger bearing capacity and the more breeding space, C shape leg is formed of hot dip galvanized sheet is easy to clean.
The cage bottom adopt Belgium Bekaert galvanized aluminum wire, which advantage is high intensity, good elasticity , the surface is so smooth to reduce the egg breakage.
cage bottom mesh adopt Belgium Bekaert galvanized aluminum wire, the advantages of this wire is high intensity, good elasticity ,it can effectively alleviate the chicken fatigue.
Compared to hot-dip ,it's not only greatly enhance the arntirust effect, but also improve the cage surface smooth, to avoid the hurt of chicken scratch.
Sliding door with lock is convenient to open and close. thus no layers can run away, and feed can not be thrown out of trough when eating.
2).Automatic feeding system
The feeding system adopt feed trolleys. The reliable driving feeding system rely on the strong cage frame and the strengthened guide rail, each trolley is equiped with two groups of guide wheels .
Smooth rail and feed trough make guide wheels run smoothly without noise, and ensure the feed to be distributed evenly.
3).Automatic drinking system
The square drinking pipes are installed on the longitudinal central axis of each tier of cage in order to save space, supplying water to layers of both sides. layers in both sides can touch two nipple drinkers.
There is a V-shaped trough placed below the drinking pipe to prevent drinking water from dropping onto manure belt.
4). Automatic manure removing system
5).Automatic egg collection system
cage bottom angle is 7°,the reasonable rolling angle is designed to reduce the rate of egg breakage.
6).Environment control system (included cooling pad +ventilation fans + temperature controller+electric system+tunnel door)
Our factory
1. Our factory was founded in 2002 and has more than 800 employees,covers the 100,000 square meters,is a professional manufacturer of poultry farming equipments including
"H"frame layer cage system,broiler cage system,duck-production cage system, ,egg-duck cage system ,layer rearing cage system,layer breeder parents cage system,feed silo,bulk feed transporting tank and feed machinery etc.
2. We have been regarding technical innovation as the effective power of development,and continuously absorbing the advanced technology and experience to improve our capability of research and development and manufacture special products according to different requirement of customers.we have an advanced R&D center and a complete R&D system,and a R&D team which more than 40 technicians has been organized.At present.
we have more than 260 kinds of products and more than 80 patents.The products and projects with HENGIN brand have covered the entire China as well as more than 60 countries and regions.
We carry on the tenet of "honest based,value creating"in our daily business to provide cost efficient products and services for customers.
Our Service
1. H type 4 tiers layer cage size
| products name | 4 tiers H type chicken layer cage | Model | 9LDC4288 |
| Material | galvanized wire | Tiers | 4 Tiers |
| one unit size | 1200mm×1560mm×2740mm (L×W×H) | unit capacity | 128/144 birds |
| one cell size | 600mm×600mm×445mm (L×W×H) | cell capacity | 8/9 birds per cell |
| life span | 20 years | living space/bird | 450/400 cm² |
2.The H frame chicken layer cage system is Highest Automatic Equipment for Layer Farms, it includes:
1). Cage and Frame
The distance between each legs is 1206mm, the tier height is 590mm, and the width (including feeding troughs) 1560mm.
Such cages have larger bearing capacity and the more breeding space, C shape leg is formed of hot dip galvanized sheet is easy to clean.
The cage bottom adopt Belgium Bekaert galvanized aluminum wire, which advantage is high intensity, good elasticity , the surface is so smooth to reduce the egg breakage.
cage bottom mesh adopt Belgium Bekaert galvanized aluminum wire, the advantages of this wire is high intensity, good elasticity ,it can effectively alleviate the chicken fatigue.
Compared to hot-dip ,it's not only greatly enhance the arntirust effect, but also improve the cage surface smooth, to avoid the hurt of chicken scratch.
Sliding door with lock is convenient to open and close. thus no layers can run away, and feed can not be thrown out of trough when eating.
2).Automatic feeding system
The feeding system adopt feed trolleys. The reliable driving feeding system rely on the strong cage frame and the strengthened guide rail, each trolley is equiped with two groups of guide wheels .
Smooth rail and feed trough make guide wheels run smoothly without noise, and ensure the feed to be distributed evenly.
3).Automatic drinking system
The square drinking pipes are installed on the longitudinal central axis of each tier of cage in order to save space, supplying water to layers of both sides. layers in both sides can touch two nipple drinkers.
There is a V-shaped trough placed below the drinking pipe to prevent drinking water from dropping onto manure belt.
4). Automatic manure removing system
5).Automatic egg collection system
cage bottom angle is 7°,the reasonable rolling angle is designed to reduce the rate of egg breakage.
6).Environment control system (included cooling pad +ventilation fans + temperature controller+electric system+tunnel door)
Our factory
1. Our factory was founded in 2002 and has more than 800 employees,covers the 100,000 square meters,is a professional manufacturer of poultry farming equipments including
"H"frame layer cage system,broiler cage system,duck-production cage system, ,egg-duck cage system ,layer rearing cage system,layer breeder parents cage system,feed silo,bulk feed transporting tank and feed machinery etc.
2. We have been regarding technical innovation as the effective power of development,and continuously absorbing the advanced technology and experience to improve our capability of research and development and manufacture special products according to different requirement of customers.we have an advanced R&D center and a complete R&D system,and a R&D team which more than 40 technicians has been organized.At present.
we have more than 260 kinds of products and more than 80 patents.The products and projects with HENGIN brand have covered the entire China as well as more than 60 countries and regions.
We carry on the tenet of "honest based,value creating"in our daily business to provide cost efficient products and services for customers.
Our Service
We can reply your inquiry within 24 hours
- develop and make new parts according to customers' requirements and detailed information.
- customize buildings for specific applications.
- provide service of designing, engineering, manufacturing and installation.
- our expert technicians can help you to assemble the project at site.
-We have more than 18 years designing experience and producing top quality products at affortable prices.
Waiting for your inquiry on 24 hours .
