Audited Supplier
ROS-2D
Action Switch
Mechanical Movement
Normally Open ,Normally Closed
Standard
Belt Conveyor
4.2kg
ISO
Stainless Steel
5A/10A
220V/380V
IP65
RAMSEY
Cardboard Box
4.2kg
China
Product Description
ROS - 2D
For the belt running deviation detection
The partial switch is check the conveyor belt running deviation in sensing element, according to the condition of belt running deviation signal.To realize automatic alarm and stop, prevent the belt from damage and continue to run.
Belt running deviation, belt drive action arm deflection, touch the micro switch action, send out alarm signal.If continue to deviate to set down position, touches another group of contacts, conveyor is a protective stop.
The partial switch are normally installed in 0.3 2 meters distance conveyor head or the tail, usually in pairs installed on both sides of conveyor.Can be fixed on the conveyor at the top or bottom of the girder.Action bar is about 25-75 - mm belt edge distance.
Features:
General structural design can be installed on the conveyor at the top or bottom of the girder.
Solid aluminum shell.Protection grade reaches IP65.
One-piece cover plate, junction box to adjust easily.
Don't need to pull down action bar, you can remove the casing.
Action rod bearing rated speed 5000 r/min, apply to the belt speed can reach 6.35 m/s.
Action bar method to adjust Angle range is + 22.5 degrees.
Actuating rod can be two-way movement, facilitate bilateral symmetry in the conveyor installation.
Partial prevention switch standard set for the law to the Angle of 10 degrees, alarm contact action, and the normal Angle of 20 degrees stop contact action.
Technical specifications:
Two SPDT switch contact rating, 10 a / 500 v
The normal alarm point of plus or minus 10 degrees, plus or minus 20 degrees
IP65 protection grade
Reaction of 3-4 kg
Weight 4.2 kg
Optional:
Mounting bracket, for large conveyor
Internal proximity switch instead of micro switch
Special surface treatment, surface plating nickel and stainless steel actuating rod
Address of the encoder
The lamp
A complete set of fixed accessories: including cable, chuck, retainer, the light bulb
Scope of application:
Conventional belt conveyor, including flat belt conveyor and trough belt conveyor
Underground, ropeway support belt conveyor
The skirt side feeding conveyor
Stacking, picking system
The ship handling system
Excavator boom crane limit
Heavy limit switch
