Audited Supplier
| AL-1600SS | 29*12*12 | 250KW/h | 250m/min | 10t/days | 10-200g/m2 |
| AL-2400SS | 29*13*12 | 300KW/h | 15t/days | ||
| AL-3200SS | 29*13*12 | 350KW/h | 20t/days | ||
| AL-4200SS | 29*14*12 | 400KW/h | 24t/days |
Main extruder
Extruder is used for melting and extruding PP Chips, master batches and some additives, such as antioxidant, anti-pilling agent and flame retardant agent.
Extruder machine consists of chip inlet, automatic temperature control, cooling device and alarming device.
Main drive adopts A.C. frequency control. The temperature control device adopts closed circuit temperature meter, solid relay and pt100 platinum resistance.
Stretching device
Stretching device is used for drawing filament( passing from spinneret ) being into longer and thinner.
1.Nominal working width: 1910mm
2:Quenching air volume: 10,000m3/h
3:Pressure: approx. 5000Pa
FAQ
1:When you encounter problems, or your equipment needs to be upgraded, we can provide you with the most energy-efficient and reasonable budget solution
2:If you are a novice in the market, we will provide you with the most professional consulting services and guidance according to your expectations.
Make sure you do a test or trial before shipment so that you can witness real-time production and make necessary adjustments according to your market needs.
3:If you are planning to Increase your production scale, Let us know your requirements ( Intended product, Capacity, Density and Raw material)
We avail you the Production layout of the new line for your reference.
If you have another question, pls feel free to contact us as below:
Our location in YIwu,which is near Shanghai (around 300km) and Hangzhou( just 120km).
