Audited Supplier
Voltage Relay
Car Relay, Household Appliances Relay, Communication Relay, Lathe Relay
3
Ac
3
High Power Relay
Open Relay
Rectifier Type
Miniature
Electric Parameter Relay
Product Description
(1) Detailed Images
(2) Product Capability
Control Voltage | 3-32VDC | On-off Time | ≤10mS | ||||||
Control Current | DC6-12MA | Dielectric Strength | 2000VAC | ||||||
Load Voltage Range | 90-480VAC | Insulation Resistance | 500MΩ@500VDC | ||||||
Load Current | 10A,15A,25A | Ambient Temperature | -20~+70 | ||||||
Off-state Leakage Current | <=4MA | Mounting Methods | BOLT FIXING | ||||||
On-state Voltage | ≤1.5V | Work Instructions | LED | ||||||
Installing Dimension | 47MM | Weight | 105G | ||||||
Type | SCR-LA-WY | ||
Rated Current | 25A 40A 75A 90A 120A | ||
Dimension(mm) | W | 100 | |
L | 110 | ||
H | 145 | ||
Installation Dimension(mm) | W | 90 | |
L | 80 | ||
(3) Dimension diagram
(4) Wiring diagram
1. Connect the meter, module, load, and fuse power supply according to the wiring diagram. The working power must be in common phase(means the same) with the load power, or it will be damaged to the voltage regulator.
2. Fuse FU must be connected to the input end of phase line and shall not be connected to other positions.
3. The thyristor radiator shall be fully considered to avoid electric shock and short circuit between electrodes of the thyristor.
4. Every phase trigger signal wire of SSR-DV connected to voltage regulator should very short and separated from other wires in case of triggering the SSR-DV lose control due to mutual interference.
5. The rated current of SSR-DV must be more than two times the actual current, Large enough radiator, good ventilation and heat dissipation are needed to ensure the temperature of SSR-DV is under 70 in any occasion.
6. Suitable load: constant resistance type heating wire, IR infrared ray and UV lamp.
Sea shipment
Door to door delivery
Air transport
(1) Factory Introduction
(2) Production Process
(3) Exhibition
(4) Certifications
1. Q: Can you provide OEM service?
A: Yes, we can.
2. Q: What's the MOQ?
A: For testing purpose, 1 pc is ok.
3. Q: Can you provide trade assurance service?
A: Yes, we are member of the trade assurance scheme.
4. Q: What's the lead time?
A: General lead time is 15 days after payment.
5. Q: What's your waranty?
A: We provide 12 months warranty against manufacturing defective.
