Arkema Pebax 2533 SA01 MED/2533 SD02/3533 SA01 MED/3533 SP01/5533 SN70 BLACK TPE Resin

Other text information:
Processing conditions:
- Typical melt temperature (Min / Recommended / Max): 220°C / 240°C / 260°C.
- Typical mold temperature: 25-60°C.
- Drying time and temperature (only necessary for containers opened for more than two hours): 5-7 hours at 70-90°C.
- Typical melt temperature (Min / Recommended / Max): 220°C / 235°C / 250°C.
- Drying time and temperature (only necessary for containers opened for more than two hours): 5-7 hours at 70-90°C.

Characteristics:
Processing:Injection Molding, Other Extrusion
Delivery form:Pellets
Application in Chemical and General Industry:Packaging / Film
Special Characteristics:Heat Stabilized, Light stabilized or stable to light

Pebax Elastomers - A family of lightweight polymers that offer unmatched energy return and cold temperature durability for dynamic applications.Pebax thermoplastic elastomers consist of polyamide and polyether backbone blocks. These specialty elastomers offer very low material density, a wide range of shore hardness values, extremely efficient energy return (over a wide temperature range) and are optionally biobased.

For many years, Pebax elastomers have become famous for their outstanding combination of lightweight (typically 20% lighter than competitive polymers) and tremendously efficient energy return. Their "hysteresis loss" (intrinsic energy loss during flexural cycling) are among the lowest in the world. Further, Pebax elastomers tend to maintain this flexural efficiency advantage over a wide temperature range - in other words, they tend not to stiffen/embrittle at lower temperature, and they tend not to soften or lose elasticity at higher temperatures.The inherent combination of lightness, toughness, flexibility and outstanding energy return has helped establish Pebax resins as the reference polymers in several sports applications.

Pebax elastomers are also recommended for a wide range of industrial film applications where the traditional durability and toughness of polyamides resin (nylon) is required, but also the ability to bend, draw, and repeatedly flex.

Pebax Elastomers are block copolymers made up of rigid polyamide blocks and soft polyether blocks. Manipulating these blocks and their relative ratio allows for the creation of a large range that spans the flexibility spectrum from very hard and rigid to very soft and flexible, without the need for plasticizers. These unique polymers maintain the highly desirable combination of the toughness traditionally associated with polyamides and the flexibility/elasticity more often seen with polyethers/polyesters.

We can give discount according to order quantity.

We also have good experience in transportation both by air and ocean to overseas.