Audited Supplier
ASCB1-63-C16-2P intelligent circuit breaker remote control is a brand new smart power product launched by Acrel. ASCB1 series product consists of an intelligent miniature circuit breaker and an intelligent gateway, which can be used for real-time monitoring of key electrical factors of power lines, such as voltage, current, power, temperature, leakage, energy consumption, etc. It has functions such as remote control, early warning protection, short-circuit protection, energy measurement statistics, fault location, etc., and is used in low-voltage terminal distribution networks in industrial, commercial, civil buildings and infrastructure in indoor buildings and similar places.
Rated voltage: 230V (1P/2P), 400V (3P/4P)
Rated current: 16A,32A,63A
Rated short-circuit breaking capacity: 6000A
Real-time monitoring of electric parameters such as voltage, current, power, electrical energy and temperature
Overvoltage, undervoltage, overload, short circuit, overcurrent and overtemperature protection
With local manual push rod, local electric control, local lock, remote control, timing control and so on
RS485 (Modbus-RTU) standard, with Ethernet and 4G optional
Parameters
| Model | ASCB1-63 | ASCB1LE-63 | |||
| Pole | 1P/2P/3P/4P | 2P/4P | |||
| Grade of Shell | 63A | ||||
| Rated Voltage | 230V(1P/2P),400V(3P/4P) | ||||
| Rated Current | 6A,10A,16A,20A,25A,32A,40A,50A,63A | ||||
| Instantaneous Unbuckle Type | C/D | ||||
| Rated Short-circuit Breaking Capacity | 6000A | ||||
| Leakage self-Inspection | No | Manual button self-inspection | |||
| Mechanical Life | 20000 times | ||||
| Electrical Life | 6000 times | ||||
| Levels of Protection | IP20 | ||||
| Connection Capacity | 1-35mm² | ||||
| Elevation Requirements | 2000m | ||||
| Ambient Temperature | -10ºC~55ºC,the average temperature at 24h was no higher than 40ºC | ||||
| Way to Installation | Standard 35mm guide rail installation | ||||
| Protect | Over-current Protection | Default 100% rated current alert,110% Rated current trip with adjustable threshold | |||
| Short-circuit Protection | 5-10 Rated current for 0.04 seconds for circuit break protection | ||||
| Overload Protection | Default 100% rated power alert,110% Rated power trip with adjustable threshold | ||||
| Over-voltage Protection | Default 110% rated voltage alert,120% rated voltage trip with adjustable threshold | ||||
| Under-voltage Protection | Default 90% rated voltage alert,80% rated voltage trip with adjustable threshold | ||||
| Over-temperature Protection | Default 80ºC alert,100ºC trip, the threshold is adjustable | ||||
| Leakage Protection | No | Default 20mA alert, 30mA trip, the threshold is adjustable | |||
Installation Method
Features
1. Monitor voltage, current, power, electric energy, temperature and other parameters in real time
2. With multiple protection functions such as over-voltage, under-voltage, overload, short circuit, over-current, over-temperature, etc.
3. With local handle on-off, local electric control, local locking, remote control, timing control and other control functions
4. Standard configuration RS-485 (MODBUS) communication, optional tripping curve type C/D
5. Guide rail installation, optional module 1P/2P/3P/4P
Q: Can the circuit breaker data be collected through RS485 communication?
A: The circuit breaker has its own RS485 communication interface, and it does not need to be equipped with an ASCB1-M gateway to access the customer system, but the customer needs to provide the circuit breaker with DC12V 12A auxiliary power supply
Q: How many circuit breakers can a gateway carry?
A: 16PCS
Q: How Gateways and Circuit Breakers are Networked?
A: The gateway and the circuit breaker are connected by a 4pin cable, a set of DC12V auxiliary power supply, and a set of RS485 communication lines.
The connection between the circuit breaker and the circuit breaker is the same.
One-key addressing operation through the gateway
Q: Does the circuit breaker need to be equipped with additional accessories?
A: 1. Internally integrate various sensor modules, including: current sensor, leakage transformer, temperature sensor, etc.;
2. The circuit breaker integrates the release function, which can realize remote opening and closing operations;
3. Configure the circuit breaker network cable
