Audited Supplier
SBS PY I
Sbs Modified Bituminous Waterproof Membrane
Waterproof Membrane
Sbs, Bitumen, Polyester
Polyester Felt, Composite Felt
-10degree, -20degree, -25degree
1m
10m
2--5mm
28kg--60kg
90degree
500n/50mm
High Tensile Strength
Roof, Subway, Tennel, Bridge
PE Film
Aluminum Foil
Jianda
Packed in Rolls with Pallet
1m*10m
Cangzhou, China
6807100000
Product Description
SBS modified bituminous waterproof membrane can be widely used for
building surface and basement waterproof in industrial and civil
construction engineering, as well as waterproof for subway, cold storage,
airport runway and viaduct. While polyester felt is especially suitable for
waterproof of unstable structure engineering. The surface can be PE film,
aluminum foil, mineral granule and sand. The main purpose of the surface
is anti-aging
Features and benefits:
Anti-aging, anti-acid, and anti-alkali,
Long service life
High tensile strength and elongation
Good perdurable capacity to climate Applied by torch.
| soluble content/(g/m2) | 2100g/m2 |
| thickness | 3mm |
| heat resistance | 90degree |
| low temperature flexibility | -20degree |
| not permeable 30min | 0.3mpa |
| tensile strength | 500N/50mm |
| elongation | 30% |
| size change rate | 0.7% |
| seam peel strength (N/mm) | 1.5 |
| upper surface | PE film |
| bottom surface | grey mineral granule |
| advantage | anti-aging, long service time |
| how to apply | heating torch the bottom surface and then stick it to the substrate |
Package transportation and storage
The product is packed by plastic bag or adhesive tape.
Thickness:2-4mm width:1.0m length:7.5mm 10mm
During storage and transportation, keep the package well, put them in a dry , airy place, keep away from
direct sunlight, acids, alkalis, oil and organic solvents.
The waterproofing base should be strong smooth, and clean without particles on the surface. No peeling
or cracking shall exist on the surface. The corners of the base shall be made into arcs with a radius of
no less than 20mm or triangular. The drain slope, division seam, and air vent shall be carried out and
treated according to design requirements. Then brush primer on the foundation until it is dry
Cangzhou Jiansheng Building Waterproof Materials Co., Ltd. is a professional enterprise integrating the production and sale of building waterproof materials. Our company covers an area of 10, 000 square meters. There are 60 people in our company, including 5 professional senior engineers and 24 technicians. Our company is to set up a technological research team which consists of professionals, scholars and experts. Our company is specialized in the production and operation of various types of high and mid-grade new building waterproof materials, including SBS, APP modified bitumen membrane, polypropylene, and PE polyester. We have domestically advanced production lines with annual production capacity of 8 million square meters, advanced equipment, and strict scientific quality control system according to standards. At the same time, we produce SBS polymer waterproof coating, Chloroprene latex, asphalt and other series of waterproof paint. Our company is also equipped with first-class raw materials testing equipment as well as process control and finished product quality testing center. Our company is willing to cooperate with friends sincerely to advance hand in hand and create a better future.
