Audited Supplier
ISO 9001:2008
Spray-Paint
Forging
Alloy Steel
Mining
Super Diamond
Ply-Wood Case for Safe Delivery
130 - 156 mm
China
8412310090
Product Description
Description:
DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance.
DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate.
Our bits are interchangeable with Atlas Copco's COP32 34 44 54 64 84, Ingersoll-Rand 's DHD3.5,DHD3.5HD, DHD 340A , DHD350R, DHD 360, DHD380 QL40, QL50 , QL60, QL80.NUMA100, NUMA120, MISSION60,ects
| Technical Parameters ( BROCA PARA MARTILLO DE FONDO Drill Bits ) | ||||||||
| Diameter | No x Button diameter, mm | Button angleº | Flushing holes | Weight(kg) | Part No | |||
| mm | inch | Gauge Buttons | Front Buttons | |||||
| 76 | 3 | 6*13 | 4*10 | 38 | 2*12 | 3.5 | CD-25-76 | |
| 80 | 3 1/8 | 6*14 | 4*11 | 38 | 2*12 | 3.8 | CD-25-80 | |
| 82 | 3 1/4 | 6*14 | 4*11 | 38 | 2*12 | 3.9 | CD-25-82 | |
| 90 | 3 9/16 | 8*12 | 5*12 | 38 | 2*12 | 4.3 | CD-25-90 | |
DTH drill bits
1. Customized acceptable
2. Bit diameter, face shape
3. Carbide button shape
4. Qty of air hole
Carbide button shape selection:
1. Domed/Round Button
Domed/Round Buttons are usually used as gauge buttons of DTH Bits, suitable for every abrasive and very hard formations.
2. Parabolic/Semi-Ballistic Buttons
Parabolic Buttons are usually used as gauge buttons and front buttons of DTH Bits, suitable for medium abrasive and hard formations.
3. Ballistic Button
Ballistic Buttons are usually used as front buttons of DTH Bits, suitable for medium abrasive and mesium hard formations. They can also be used as gauge buttons if the rock is soft.
4. Sharp Button
Sharp Buttons are usually used as front buttons of DTH Bits for soft formations where fast penetration rates are possible.
5. Flat Button
Flat buttons are usually used as protection buttons to reduce wear on rubbing surfaces of DTH bits.
