
Technical data for CP-300PLUS spray booth
| Outside Dimension(mm) | 7000×5850×3400 | |
| Inside Dimension(mm) | 6900×4500×2650 | |
| Front Door(mm) | 3600×2600(W*H) | |
| Service door(mm) | 800×2000(W*H) | |
| Total Power | 18kw | |
| Cabin system | Front door | 4 folded sheet metal formed door |
| Wall panel | 50mm EPS sandwich panel, steel sheet thickness: 0.426mm | |
| Ceiling panel | Galvanized steel sheet | |
| Basement | 300mm depth construction galvanized basement, two rows galvanized grids, three rows checkered plates. | |
| Ramps | Two pieces 2000*750mm ramps | |
| Door glass | 5mm tempered glass | |
| Air make-up system | Air inlet fan system | 2 sets 4kw centrifugal fan, fan model: YDW-4.5L |
| Exhausted fan system | 1 set7.5kw centrifugal fan, fan model: YDW-5.6S | |
| Air inlet capacity | 24000m3/h | |
| Exhuasted capacity | 21000m3/h | |
| Exhausted ducting | Four meters straight galvanized ducting and one 135 degrees elbow | |
| Purification system | Pre-filter | G3 grade |
| Ceiling filter | 600G filter EU5 / F5 | |
| Floor filter | Fiberglass filter | |
| Exhausted filter | Filber glass and carbon filter | |
| Heating system | Heat Exchanger | SUS304 200KW stainless heating exchanger |
| Heating burner | Riello G20 diesel oil burner | |
| Heating productivity | 20000Kcal/hour | |
| Spray to baking switch | Pneumatic damper | |
| Chimney ducting | 4 meters chimney and one chimney elbow | |
| heating temperature | Maximum 80ºC | |
| fuel consumption | 6-8L/vehicle | |
| Lighting system | Ceiling lighting | 8 Units, each 4 * 16.5W LED lamps. |
| Side lighting | 8 Units, each 4 * 16.5W LED lamps. | |
| Illumination | 1000LUX | |
| Control system | Switch controlling system | Spraying & baking switch, lighting switch, timer , temperature controlling switch, emergency stop, breakdown alarm, failure alarm, pressure gauge |
How we load the containers?
Factory View
With Customers

Projects





Audited Supplier










