Audited Supplier
A5450
2PC-10c Resolution 10FC
>=10fa
15mm
280(L)*280(W)*300(H)mm
1PA-200na
<=+-0.5%
60L
420(L)*380(W)*420(H)mm
(0...+-500V), Increment<=5V
<=+-0.5%
<=23kg
SUN
Master Carton
480(L)*450(W)*550(H)mm
Guangzhou
9018909999
Product Description
A solution to an accurate, convenient and efficient annual check of LINAC's 3D field parameters.
· So small in size that no lifting facilities are needed to put it on the couch
· Tripod knobs can be turned to roughly adjust the leveling
· Crosshair at the bottom can help fast positioning
· It takes only 10 minutes from phantom positioning to the start of measurements
· Stainless steel screw, aluminum alloy sliding rail, stainless steel ball sliding rail and hollow design are adopted to reduce weight to the greatest extent and avoid water movements when detector is moving
· Replaceable detector textures make possible for detectors of different types to measure steadily and accurately
· AutoScanner software controls AutoScanner to automatically level, collect background data and locate isocenter, thus further shorten setup time and reduce manual operations
· By presetting queuing list before measurements and importing the list with just a press of the button during measurements, the software processes measurements automatically. Then AutoScanner starts operating every item on the list right after the last one is finished. So manual operations are furhter reduced
· Analysis and calculation of PDD, TPR, TMR, profile and point dose are applicable
· Parameters in protocols such as IEC, IAEA, AAPM, Varian and Elekta are available
Control Box
· The ancillary control box is used in the operating room to control position of the measuring point or restore it to the original position with just one press of the button
Two-channel Electrometer
· The two-channel electrometer is compatible with most detectors, and its high resolution makes possible more accurate signal response
Integrated Carrying Cart
· 80L in capacity
· Equipped with a dual-motor suction pump, both filling and draining of water can be finished in about 3 minutes
· Convenient to store and move AutoScanner on the cart
Internal design
