Audited Supplier
auto start stop eliminator
Auto Start Stop Eliminator
1 Months
for a Variety of Models
Auto Start Stop Eliminator
Black
Other
Pack of One Set
Plastic
7.08*1.14*.0.98inch
1.23 Ounces
10PCS
fransonic
Box
Zhejiang, China
Product Description
Auto Start Stop Eliminator/Delete/Disable for Chevrolet Equinox (2017-2018)/Malibu (2016-2018)/ Cruze (2015-2018) and for Cadillac
XT5 (2016-2018)
XT5 (2016-2018)
* PERFECT COMPATIBILITY The product is perfectly compatible with all old and new Chevrolet, Cadillac, Buick. Please confirm the
production year of your car before buying, so as not to buy the wrong product!
* EASY TO USEWhen the engine is turned off, open the hood and find the plug that looks like the product in the wiring harness
in the front of the engine compartment, unplug it, connect the product, cover the hood, drive and test, step on the brakes and
do not turn off, indicating that the installation is successful.
* PREMIUM QUALITYThe product adopts the original factory plug and original factory terminal, the quality is fine and
waterproof, and the PA flame-retardant material is high temperature resistant.
* PLUG & PLAYJust connect this product to achieve permanent shutdown auto start-stop, and it will have no effect on your car.
If you need to restore it, just remove it.
* WHAT YOU GET1 x Cable, 2 x Tie (Used to fix the cable).
production year of your car before buying, so as not to buy the wrong product!
* EASY TO USEWhen the engine is turned off, open the hood and find the plug that looks like the product in the wiring harness
in the front of the engine compartment, unplug it, connect the product, cover the hood, drive and test, step on the brakes and
do not turn off, indicating that the installation is successful.
* PREMIUM QUALITYThe product adopts the original factory plug and original factory terminal, the quality is fine and
waterproof, and the PA flame-retardant material is high temperature resistant.
* PLUG & PLAYJust connect this product to achieve permanent shutdown auto start-stop, and it will have no effect on your car.
If you need to restore it, just remove it.
* WHAT YOU GET1 x Cable, 2 x Tie (Used to fix the cable).
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product
may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
This product is perfectly compatible with Chevrolet/Cadillac/Buick without error codes.
Applicable cars:
* Chevrolet: Equinox (2017-2018), Malibu (2016-2018), Cruze (2015-2018)
* Cadillac: XT5 (2016-2018), ATS-L (2014-2019)
* If you are a Buick owner, please consult before buying to avoid buying the wrong product.
Please confirm the year of production of your model before buying to avoid buying the wrong product.
Applicable cars:
* Chevrolet: Equinox (2017-2018), Malibu (2016-2018), Cruze (2015-2018)
* Cadillac: XT5 (2016-2018), ATS-L (2014-2019)
* If you are a Buick owner, please consult before buying to avoid buying the wrong product.
Please confirm the year of production of your model before buying to avoid buying the wrong product.
Title goes here.
Installation Notes
1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don't use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground
threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red
terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large
terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red
wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
Installation tips:
1.Turning off the engine, replace the new cooling fan temperature switches after the water in engine radiator cooled to the room
temperature.
2.Avoid the external high heat source after installation.
3.Avoid sprinkling water on surrounding auto parts during the installation.
1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don't use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground
threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red
terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large
terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red
wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
Installation tips:
1.Turning off the engine, replace the new cooling fan temperature switches after the water in engine radiator cooled to the room
temperature.
2.Avoid the external high heat source after installation.
3.Avoid sprinkling water on surrounding auto parts during the installation.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
