Audited Supplier
Epoxy Primer
Grey,White, Zinc Yellow
Liquid
Acrylic & Polyurethane
Antiseptic Paint
Spray
Finish Coat
ISO14001, ISO9001
Iron
Solvent
Conversion Type
Car Paint, Automotive Paint
Auto Paint, Automotive Refinish
High Gloss, High Adhension
Good Coverage, High Concentration
High Chroma, Easy Operation
Corrosion Resistant, Weather Resistance
Good Colors, Levelling Property
Fillibility, Repair
Flexibility,High Fullness,Good Transparency
Easy Operation, Easy Sanding, Easy Spraying
Highly Metallic, High Shining,High Flash
All our brands
Standard Export Carton
Carton, Drum, OEM Could Be Serviced
Guangdong, China
3208
Product Description
Epoxy primer
1: Product Features: This series of products are two-component pure epoxy primers with excellent adhesion, providing excellent adhesion, corrosion resistance and chemical resistance to all kinds of metals, FRP and glass
2: Usage: Usually used for all kinds of vehicles, machinery and other metal surface protective coating
3: Suitable substrate: iron, aluminum, galvanized sheet, glass fiber reinforced plastic, stainless steel and other surfaces that have been polished and completely clean.
4: Mixing ratio (volume ratio) : Epoxy primer 100%: hardener 25%: thinner 25%
5: Spraying viscosity and time: mix evenly before use, spraying viscosity is 20 seconds (coating -4 cups, 20ºC), the time limit is 2 hours /20ºC
6: Spraying requirements: Use 1.5 ~ 1.8mm caliber spray gun, air pressure is 3-5 bar, spray 2-3 monolayers, film thickness is about 40 ~ 50um, flash dry for 5 minutes every time.
7: Drying time, grinding: room temperature 20ºC for 3 hours, bake 70ºC-80ºC/20 minutes
8: Grinding process: water sandpaper P180-P800 or (mechanical) dry grinding P180-P240.
9: Points for attention:
(1)Please stir well before use, and filter clean; .
(2)In order to ensure the coating effect, please use epoxy special hardener, diluent; .
(3) Primer should not be sprayed too thick, otherwise it will cause too slow drying or poor adhesion between layers. When the working environment temperature is lower than 5ºC, it is not suitable to spray 2K epoxy primer or heat baking.
Expoxy Primer
Good Quality Car Paint, Car refinish, Auto paint, auto refinish
Epoxy Primer Fast drying
Exellent rust-proofing and excellent adhension to steel, aluminium and galvanized steel.
1: Product Features: This series of products are two-component pure epoxy primers with excellent adhesion, providing excellent adhesion, corrosion resistance and chemical resistance to all kinds of metals, FRP and glass
2: Usage: Usually used for all kinds of vehicles, machinery and other metal surface protective coating
3: Suitable substrate: iron, aluminum, galvanized sheet, glass fiber reinforced plastic, stainless steel and other surfaces that have been polished and completely clean.
4: Mixing ratio (volume ratio) : Epoxy primer 100%: hardener 25%: thinner 25%
5: Spraying viscosity and time: mix evenly before use, spraying viscosity is 20 seconds (coating -4 cups, 20ºC), the time limit is 2 hours /20ºC
6: Spraying requirements: Use 1.5 ~ 1.8mm caliber spray gun, air pressure is 3-5 bar, spray 2-3 monolayers, film thickness is about 40 ~ 50um, flash dry for 5 minutes every time.
7: Drying time, grinding: room temperature 20ºC for 3 hours, bake 70ºC-80ºC/20 minutes
8: Grinding process: water sandpaper P180-P800 or (mechanical) dry grinding P180-P240.
9: Points for attention:
(1)Please stir well before use, and filter clean; .
(2)In order to ensure the coating effect, please use epoxy special hardener, diluent; .
(3) Primer should not be sprayed too thick, otherwise it will cause too slow drying or poor adhesion between layers. When the working environment temperature is lower than 5ºC, it is not suitable to spray 2K epoxy primer or heat baking.
Expoxy Primer
Good Quality Car Paint, Car refinish, Auto paint, auto refinish
Epoxy Primer Fast drying
Exellent rust-proofing and excellent adhension to steel, aluminium and galvanized steel.
| Substrates | Dried and sanded existing finishes, steel, iron and glass fiber reinforced plastic | |||||
| Surface Cleaning | Remove wax, silicon and other contaminations with degreaser | |||||
| Mixing Ratio | Temperature | Item | Weight | Volume | ||
| Above 30degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
| Drying Hardener | 20 parts | 1 parts | ||||
| Thinner | 20-30 parts | 1 parts | ||||
| Under 30 degree | Fast Epoxy Primer | 100 parts | 3.5 parts | |||
| Fast Drying Hardener | 20 parts | 1 parts | ||||
| Thinner | 20-30 parts | 1 parts | ||||
| Pot Life | At 25degree, Fast Drying Hardener: 3-4 hours; Drying Hardener: 4-6 hours | |||||
| No. of Coats | 2 coats, about 30-50 um | |||||
| Flash-off Time | At 25degree, 5-10 minutes between coats. | |||||
| Spray Gun and Pressure | Gravity Feed 1.4-1.6mm 3-5kg/cm 2 Siphon Feed 1.7-1.8mm 3-5kg/cm 2 | |||||
| Drying Time | Item | 25degree | 70degree | |||
| Fast Drying Hardener | 3-5 hours | 40-50 minutes | ||||
| Drying Hardener | 6-8 hours | 50-60 minutes | ||||
| Sanding | Dry sanding with P240-P400, or wet sanding with P600-P800 | |||||
| Re-coat | After drying and sanding, re-coat with putty, primer surfacer and all kinds of topcoat. | |||||
| Shelf Life | 2 years in original sealed can at cool and dry place at 20degree | |||||
| Packaging | Epoxy primer in 4L, Hardener in 1L, Thinner in 1L | |||||
