Audited Supplier
1K basecoat
Milky
Liquid
Acrylic & Polyurethane
Antiseptic Paint
Spray
Finish Coat
Iron
Solvent, Pigment & Auxiliaries
Conversion Type
Car Paint, Automotive Paint
Auto Paint, Automotive Refinish
High Gloss, High Adhension
Good Coverage, High Concentration
High Chroma, Easy Operation
Corrosion Resistant, Weather Resistance
Good Colors, Levelling Property
Fillibility, Repair
Flexibility,High Fullness,Good Transparency
Easy Operation, Easy Sanding, Easy Spraying
Highly Metallic, High Shining,High Flash
All our brands
Standard Export Carton
Carton, Drum, OEM Could Be Serviced
Guangdong, China
3208
Product Description
Silver control additive
(1)Product Features: Silver control additive is one component (1K) silver, pearl special effect additives. Adjust the reflective surface of silver, pearl and other metallic paint to make the particle sense stronger, the front side dark, 45 degrees white, larger particles, added can change the arrangement rules of silver powder, the more the use of the proportion of the positive side change effect is more obvious.
(2)Note: Excessive addition of silver control agent will cause paint surface flaking, fish scaling, varnish peeling, loss of luster and other phenomena when spraying. Generally, it should be less than 18%, if more than 20% silver has no obvious effect
Car Paint, Auto Paint, Automotive Paint
professionally manufacturing high quality Automotive Paint and Car Paint.
Our full product ranges include the following:
A) Car Paint 2K topcoat
B) Car Paint 1K basecoat, Metallic,Silver
C) Auto Paint 2K high solid clear coat
D)Auto putty
E)Automotive 2K primer and 1K primer
F) Automotive Paint Binders and fixatives
G) Automotive Paint Related hardener, thinner and other solvent
Substrates Dried and sanded existing finishes, 1k or 2K Primer
Surface Cleaning Remove wax, silicon and other contaminations with degreaser.
Mixing Ratio
below 18 degree
2K Solid Colors 100 parts
Fast Drying Hardener 50 parts
Thinner 10-30 parts
18-24 degree
2K Solid Colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
25-30 degree
2K Solid colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
Above 30 degree
2K Solid Colors 100 parts
Slow Drying Hardener 50 parts
Thinner 10-30 parts
Pot Life: 2 hours, 25 degree; 4 hours, 25 degree
NO. Of Coats 2-3 coats, 40-60um
Flash-off time At 25 degree, 5-10 minutes between coats, allow 15-20minutes flash-off time before baking
Sandability and Polishabiility Dust particles and minor damages or sagging area can be sanded out with P2000 paper wet after the finish is completely dry. Compound and polish to restore gloss.
Spray Gun &
Pressure Gravity Feed 1.2-1.5mm 3-5kg/cm 2
Siphon Feed 1.4-1.7mm 3-5kg/cm 2
Drying Time Temperature Dust Free Tack Free Dry to Handle Thorough Dry
25 degree 45 minutes 2-3 hours 10 hours 7 days
70 degree 5 minutes 10 minutes 25 minutes 60 minutes
Shelf life 2 years in original sealed can at cool and dry place at 20 degree
Packaging 1L, 2.5L, 3.75L, 4L, 5L
(1)Product Features: Silver control additive is one component (1K) silver, pearl special effect additives. Adjust the reflective surface of silver, pearl and other metallic paint to make the particle sense stronger, the front side dark, 45 degrees white, larger particles, added can change the arrangement rules of silver powder, the more the use of the proportion of the positive side change effect is more obvious.
(2)Note: Excessive addition of silver control agent will cause paint surface flaking, fish scaling, varnish peeling, loss of luster and other phenomena when spraying. Generally, it should be less than 18%, if more than 20% silver has no obvious effect
Car Paint, Auto Paint, Automotive Paint
professionally manufacturing high quality Automotive Paint and Car Paint.
Our full product ranges include the following:
A) Car Paint 2K topcoat
B) Car Paint 1K basecoat, Metallic,Silver
C) Auto Paint 2K high solid clear coat
D)Auto putty
E)Automotive 2K primer and 1K primer
F) Automotive Paint Binders and fixatives
G) Automotive Paint Related hardener, thinner and other solvent
Substrates Dried and sanded existing finishes, 1k or 2K Primer
Surface Cleaning Remove wax, silicon and other contaminations with degreaser.
Mixing Ratio
below 18 degree
2K Solid Colors 100 parts
Fast Drying Hardener 50 parts
Thinner 10-30 parts
18-24 degree
2K Solid Colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
25-30 degree
2K Solid colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
Above 30 degree
2K Solid Colors 100 parts
Slow Drying Hardener 50 parts
Thinner 10-30 parts
Pot Life: 2 hours, 25 degree; 4 hours, 25 degree
NO. Of Coats 2-3 coats, 40-60um
Flash-off time At 25 degree, 5-10 minutes between coats, allow 15-20minutes flash-off time before baking
Sandability and Polishabiility Dust particles and minor damages or sagging area can be sanded out with P2000 paper wet after the finish is completely dry. Compound and polish to restore gloss.
Spray Gun &
Pressure Gravity Feed 1.2-1.5mm 3-5kg/cm 2
Siphon Feed 1.4-1.7mm 3-5kg/cm 2
Drying Time Temperature Dust Free Tack Free Dry to Handle Thorough Dry
25 degree 45 minutes 2-3 hours 10 hours 7 days
70 degree 5 minutes 10 minutes 25 minutes 60 minutes
Shelf life 2 years in original sealed can at cool and dry place at 20 degree
Packaging 1L, 2.5L, 3.75L, 4L, 5L
