Automatic Pharmaceutical Capsule Filling Machine

APPLICATION
Innovations and features
A. In order to improve the quality and production efficiency of this model, we have made significant improvement on the original 1200C automatic capsule filling machine. The overall machine size has been enlarged, where the main machine dimension is changed to1100×910×2100mm mm.
B. For ensuring the device quality and production effects: we have selected bigger high precision dividing box, which is better than 1200C automatic capsule filling machine of the same model produced by other companies in domestic industry, who usually use the configuration of 83DS and 83DS cam dividing box, and whose disadvantage is that the filling speed is limited at about 900pcs capsule per minutes in proper working condition. Forcibly increasing the filling speed to about 1000pcs capsule per minutes and continuing the working condition for these machines may cause breaking of the input and output shafts and the subsequent operation stopping. Unlike other companies, we use cam dividing configuration of 100DS, and we are the first one in domestic market to use the 100DS. Although the production cost increases, we have significantly enhanced the device's production efficiency and service life. Its filling speed has been raised up to about 1100pcs capsule per minutes. Due to these advantages, it has been widely received by customers at home and abroad
Model | NJP-1200C |
Filling capacity | 72000pcs per hour |
Weight | 1000Kg |
Dimension | 1100×910×2100mm |
Power supply | 380/220V 50Hz |
Total power | 5.5KW |
Segment bores | 9 holes |
Vacuum | 40m3/h-0.04-0.08Mpa |
Dust collector | 24.5Kpa 210m3/h |
Air compression | Air consumption 5m3/h Pressure 5-7Kg |
Water source | 500L/h 0.1-0.2Mpa |
Operating noise | <75DB(A) |
Filling percentage | Empty capsule 99.9% filled capsule 99.8% |
Capsule size | 00,0,1,2,3,4,5# |
Filling accuracy | Western medicine ±3% Chinese medicine ±4% |
Suitable for | Powder, Granule, Pellet, Tablet. |


The new hopper adopts butterfly valve-type powder feeding, and is very suitable for drug powder with poor liquidity, including Chinese herbal medicine and Chinese patent drug, due to that its vibration unit equipped will force the powder to run down, which has solved problem of failing to feed in powder that often happens in the traditional screw feeding device because of the poor liquidity of powder.

The new designed frame of capsule separation station uses transmission of guide rail, enjoying higher precision and longer service life. Its closed design can prevent the defective capsule and dust from entering, ensuring a rapid and orderly capsule separation, as well as accurate capsule orienting.

When the abnormal capsules are failed to be separated properly, powder entering the lower holes of filling station will be absorbed into powder aspirator by recycling device, completely stopping the powder from scattering onto the platform, avoiding drug powder wasting and losing.


The skeleton of ten-position turntable is machined integrally, having advantages of compact structure, no splicing gap, good sealing and easy to maintain. The upper and lower dies move independently, where the lower unit stretches and shrinks horizontally, while the upper unit runs up and down vertically. Double lip wiper dust seal preventing oil and dust is used on the shaft of fixed bracket of the upper and lower unit. It can provide a fully enclosed turntable with benefits of noise less, little in size and load and high precision, ensuring advantages of maintenance-free, lubrication charging-free, and no powder leakage for the inside part. (Patent code: ZL 2015 2 1021530.0)

Modularization design and positioning by pins for clamper of filling allow adjusting the filling dosage without need to stop the machine. The filling pipe of different size can be changed conveniently and rapidly. (Paten code.: ZL 2015 2 1021519.4)

The base of filling station is designed with negative pressure room, which is connected to the powder recycler. During the operation, any powder entering into the base will be inhaled into the powder recycler device by the negative pressure. The powder recycled will be used again after being filtered, preventing drug powder wasting and losing.

The slot type capsule locking plate is adjustable with high flexibility, it can slightly adjust at any time the misplacement in capsule locking, without need to adjust the pull rod of the station.

Use purified compressed air and intermittent gas shock technology to solve the issue that sticky powder with strong hygroscopicity will often stick onto the upper and lower die holes during production, which will cause the failure of proper separation of capsule. This will improve effectively the loading rate of capsule.



Powder recycle
Negative pressure technology and sole distribution system for powder will collect separately any powder entering into the base and the powder recycler device, ensuring that the powder will not be contaminated by wasted capsules. The powder recycled will be used again after being filtered without needing of sterilization.





Q1:Are you a dealer or manufacturer?
A1:We are manufacturer,Our Factory was located in Guangzhou, And we are the foreign trading department for this factory but with new company name.
Q3: How about the after service and guarantee period
A3: We make the warranty of 12 months from the machine's arrival in buyer's facility. With a professional team of experienced technicians, we can serve abroad and do the best after-sale service to assure the machine's perfect operation.
Q4How can I trust you for the first transaction?
Q4: Please note that our above business licenses and certificates. And if you don't trust us, we can use Trade Assurance service. it will protect your money during the whole transaction.
