Audited Supplier
Series JY straightening machine, this machine is mainly used for precision straightening and roll calendering for the bar after peeled or grinded and rough pre-straightening for the black bar.
Due to straightening and roll calendering can be completed at the same time, so that the working efficiency is high.
Principle of Operation
The machine adopts special curve between upper and lower concave and convex two straightening rolls to realize straightening and roll calendering at the same time.
Technical Parameters
| model | JY130A | ||
| Raw Material | Straightening range(mm)(not drawing material) | Yield strength σb≤450(Mpa) | Φ40≤d≤Φ130(L ≥3000) |
| Yield strength σb≤1000(Mpa) | Φ40≤d≤Φ120(L ≥3000) | ||
| Surface hardness | ≤HB320 | ||
| straightness(mm/m) | Peeled bar≤3 | ||
| Diameter tolerance | Peeled bar≤h10 | ||
| Roundness | Peeled bar≤0.04 | ||
| Surface roughness(Ra) | Peeled bar≤6.3mm | ||
| Finished product | straightness(mm/m) | Peeled bar≤0.60 | |
| Diameter tolerance | Peeled bar≤h10 | ||
| Surface Roughness(Ra) | Peeled bar ≤0.8μm | ||
| No. Of rollers | 2 | ||
| Diameter of roller(mm) | Φ460 | ||
| Feeding Speed(Stepless Speed Change) | 2~10(m/min)(High strength, high hardness, large diameter or small diameter, large roundness, large original straightness of the bar must slow down) | ||
| Main Motor Power(kW) | 90X2 | ||
| Lifting Motor Power(kW) | 5.5 | ||
| Size(m)(for reference) | main machine:11X3.4X4.6 | ||
| weight(t)(for reference) | main machine:44 | ||
| Total capacity(kW)(for reference) | 210 | ||
| Compressed air source(Self-prepared ) | 0.5~0.8MPa,1.8m3/min,Two stage oil water separator is included | ||
Product display
Packaging & Shipping
we have much experience in exporting transportation packaging.
Taking multi protection measures:
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Our Services1. Free quality guarantee period for 12 months, except for wearing parts.
2. Free provide long-term technical support
3. Free train buyer's operator in seller's factory
4. Fast response service within 24 hours
5.Our engineers can offer overseas service, including guiding installation, commissioning, training, etc, if our customer needs.
Yantai Haige Machine Tools Co., Ltd.
Contact person:Winni
Yantai Haige International Trading Co.,Ltd.
