Audited Supplier
Automatic Horizontal Sandblasting Machine Phone Case, iPad Shell
Automatic horizontal sandblasting machine provides high production, especially ideal for flat-shape parts, like stainless steel plate, energy saving steel plate, glass plate, stone, non-stick pan, baking tray, toaster, computer case, functional DVD panel, notebook computer motherboard, iron soleplate, mobile phone shell, ipad shell, etc.
How to use the conveyor automatic sandblasting machine?
The treated surface of the product is clean, has no sticky debris after automatic sandblasting.
Operator puts or fixes the products on the one side of the conveyor, the belt will transport them into the sandblasting room for automatic sandblasting. After blasting, the products will be delivered to be cleaned by air blowing gun. Finally products come out from the other side of conveyor. The entire process is automatically and continuously completed, only requires users load and discharge the products by manual.
Why choose an automatic sand blasting machine?
1. Automatic sandblasting greatly Improves productivity, reduces manpower, and save production cost.
2. Avoids the uneven blasting effect, chromatic aberration, ensures quality consistency.
3. The treated surface of the product is clean, has no sticky debris after automatic sandblasting.
4. High automation, low fault rate, working stable and reliable.
Feature of Automatic Conveyor Sandblasting system
1. Using advanced electric and pneumatic control system, a high degree of automation, good stability, low failure rate.
2. Independent cartridge filter dust collector system with good effect of dust extraction and ventilation. Environmental friendly.
3. Three abrasive funnels at the bottom of the blaster, ensures all used abrasives are recycled, reduce consumption and save cost
4. The blaster consists of 12pcs gun(quantity can be customized). The gun distance, swinging angle and position can be adjusted according to the actual products, Each blast gun is individually controlled.
5. The conveyor motor is controlled by frequency converter, whose speed can be steplessly regulated within the range of 0 ~ 2m / min. and set based on actual requirements to achieve optimal finishing results.
| Model | KF-3515-16A |
| Working Size | Length1200 * Width1400 * Height1100mm |
| Pass Thru Size | Width1000 * Height350mm |
| Overall Size | Length3500 * Width2500 * Height1500mm |
| Total Weight | 1500kgs |
| Total Power | 7.8kw |
| Dust Collector Fan Motor | 7.5kw |
| Loading of Conveyor | 300kgs |
| Conveyor Speed | 0-5m/min, adjustable |
| Drive of Conveyor | 0.4kw speed adjustable |
| Gun Clamp | Automatic swing, |
| speed adjustable | |
| Power 400W | |
| Gun QTY | 16pcs |
| Abrasive Funnel | 4 units |
| Compressed air Requirements | 35CFM/Per Gun 3-8bar(kg/cm2) |
| Body Material | T3mm-6mm Cold rolled steel plate |
