Audited Supplier
Lead Acid Car Battery Gravity Grid Making Machine 
I General indroduction of Automatic Lead acid battery Grid Casting Machine
ZH4018P series casting machine is to achieve the casting of varied kinds of alloy grids of lead-acid accumulators and can carry out the malting of alloy lead, keep constant temperature of the molds, the ration of lead feeding, the casting of the girds, the cutting and collection of girds, equipment with a reasonable structure, convenient operation, easy maintenance, wide production range, reliable running, low power consumption, etc., is ideal for the production of lead-acid battery equipment.
II Main technical parameters of Automatic Lead acid battery Grid Casting Machine
No | Name | Data |
1 | Efficiency | 7-16 grids/min |
2 | Applied size | 400 x (110-160) x (1.2-4.0) mm |
3 | Pressure | 7-8T/cm² (frame pressure: 0.168kg/mm²) |
4 | Weighing accuracy | ±0.2g (range: 0-1kg) |
5 | Thickness accuracy | 0.05 mm |
6 | Power | 9 KW |
7 | Dimension | 3440x1070x2000mm |
8 | Air consumption | 0.1m³/min |
9 | Total weight | 1.5 T |
III Main technical data of Automatic Lead acid battery Grid Casting Machine :
1, The host drive: the opening and closing of mold and the ration lead feeding use stable and reliable pneumatic components to control, and other mechanical drive means are also stable and reliable. The speed control of the main machine uses the frequency converter to realize variable speed, adjustment range is wide, speed control is simple.
2, Machine adopts upper lead pot using lead feeding ways, installed a low power, no lead and mercury mixing will not produce a large number of lead slag. (Which can be customized according to customer requirements for lower lead pot)
3, Lead feeding system uses two sets dependent lead-valve design, one control continuity of lead liquid, the other for the quantitative lead feeding valve, avoiding out-of-control of lead valve to damage the host, and can make it easier for quantitative lead feeding valve for maintenance, reducing equipment downtime.
4, Lead spoon in the non-burning gas, the heating tube power can be increased to 3KW.
5, Mold temperature is controlled by the on-off of electrothermal tube which is controlled by thermocouple in the mold , mold heating temperature control and temperature display show separately, that is when not heated as long as opening the main control switch can show that the mold temperature , circulating water control mold temperature automatically.
6, Lead spoon temperature is controlled by the on-off of electro thermal tube which is controlled by thermocouple in order to achieve automatic control of lead spoon temperature.
7, Flat cutter, parallel collect slice: cutter and grid transmission in the same plane to avoid grid deformation caused by the impact in the grid casting process, collect slice is automatically parallel laminated film for close-chip approach reduces grid deformation in the process of casting, greatly improving the grid forming rate and production efficiency.
8, To make sure stability of equipment, the key devices adopt imported equipment, inverter using "Omron" imported electrical components, etc.; pneumatic actuators using the Taiwan "Air TAC" pneumatic parts.
9, Electrical control system concentrates original host machine electric control cabinet and lead-melting furnace control cabinet for the whole, for the purpose of centralized control, systematization and automation, easy operation and maintenance.
10, Casting mold: annular exhaust joints, T-shaped water cooling groove, mold temperature (120-190 °C) is controlled by the on-off of electro-thermal tube which is controlled by thermocouple, circulating water controls mold temperature automatically.
11, There is a certain space between the machine bottom and the ground, easy to clean.
12, The machine sets aside hole site connecting to the ground screws.(also can not connect to the ground screws)
