Audited Supplier
HK-261B Automatic Pensky-Martens Closed Cup Flash Point Tester
Overview
HK-261B Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester,It isused to test for those liquids which have a kinematic viscosity of 5.8mm 2/s (cSt) or more at 37.8ºCor 9.5mm 2/s (cSt) or more at 25ºC(77F), or that contain suspended solids,or have a tendency to form a surface film while under test. Other classification flash points have been established by these departments for liquids using these test methods.
Features
1.Touch screen control, it can connect to the computer
2.Indenpendent heating module with monitoring interface,it follows the standard requirement to heat
3.Automatic ignition, flash point detecting alarm, calculate, print, record and air cooling
4.Standard reagent calibration: According to the standard, there are procedure Aand procedure B
Technical parameter
| Rated voltage | AC 220V±10% 50Hz or AC 110V±10% 60Hz |
| Power | 700WScreen: 4 wires resistor touch screen |
| Ignition | Gas ignition |
| Printing method | Thermo sensitive printer |
Reptitive error | ±1ºC |
| Ambient requirements | temperature 15~40°C, humidity: ≤85% |
