Audited Supplier
k6
One Year
Stretch Blow Molding Machine
PET
Stretch Blow
Automatic
Computerized
CE, ISO9001:2008
24hours on Line
6
Infrared Tube Heat
Mitsubishi
Parker and Siemens
9000-12000
Mac
2L
Pet
Orange
Eceng
Wooden Package/According to Customer's Request
CE ISO SGS
Zhangjiagang Jiangsu
8477300000
Product Description
Automatic PET Blow Molding Type Small Plastic Mineral Water Bottle Making Machine Pakistan Price
Model: k6
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.3percent.
Automatic PET Bottle Blow Moulding Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product.
Product Parameters
| Model K6 | ||
| Bottle type specification | Cavity | 6 |
| Max.volume | 2L | |
| Bottle mouth maximum overall diameter | 28-30mm | |
| Bottle biggest diameter | 100mm | |
| Bottle maximum height | 330mm | |
| Capacity specification | Theory output | 9000~12000BPH |
| Bottle type volume | 500ML | |
| Bottle type weight | 17g | |
| Bottle type | Round | |
| Power specification | Light tube quantity | 32pcs |
| Light tube power | 1.25KW | |
| Maximum heating power | 40KW | |
| All electric machine installation | 49KW | |
| Actual consumption | 30%--60% | |
| Air pressure specification | Work pressure | 5-6kg/cm2 |
| Blow bottle pressure | 25-45kg/cm2 | |
| Higher -pressure gas consumption | 8000Ltr/min | |
| Air pressure specification | Work pressure | 5-6 kg/cm2 |
| Temperature range | 10ºC | |
| Consumption | 8000kcal/hr | |
| Forzen water flow | 120L/min | |
| Machine specification | Machine size | 5.5x1.8x1.9 |
| Machine weight | 6.1tons | |
company information
With Customers
FAQ
packaging
