Automatic Pet Bottle Blow Moulding Machine Bx-1500A

The feature of the BX-1500 Hand-feeding Automatic PET Bottle Blow Moulding Machine is as follows:
It has saved the cost to the maximum extent; It has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.

Settings:
(a). PLC colour display: DELTA(Taiwan)
(b). Pneumatic parts: FESTO(Germany)
(c). Controller of preform transfer: Servo motor National(Japan)
(d). Other electric parts are all world-famous brand

Features:
A. Stable performance with advanced
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and increasing pressure to lock the mold.

Technical parameter:
Theoretical output: 1000-1300 PCS/hr
Container Container Volume: 0.2-1.5 L
Preform inner diameter: 16-40 mm
Preform inner diameter: 20-100 mm
Container height: 350 mm
Molding Cavities: 2 PC
Max. Mould thickness: 240 mm
Max. Mould plate dimension(LxW): 320x480 mm
Main Machine Mould opening stroke: 120 mm
Clamping force: 200 KN
Dia. Of the stretching rod: 12-14 mm
Distance of stretching: 320-350mm
Temperature controlling zone: 8 PC
Power: 10 KW
Voltage/frequency: 220/380V 50-60Hz
Main machine size: 1800x1100x1700 mm
Weight: 1.5 T
HP air compressor: 2.0m3/30kg