Audited Supplier
ZPS-900
Online Support
1 Year
≥15 Years
CCC, CE, ISO
380V
Horizontal
Zps-900
General Rubber Machinery
Material Processing Machine
Rubber Regeneration Machinery
10~100kw
≥15 Years
Customized
<50 Tons
700~800kg Per Hour 30~40 Mesh
3-5 Operators Per Shift.
SFC
Plywood Cases
CE, ISO9001: 2015, SGS
China
8477800000
Product Description
Waste Tire Recycling Line, Waste Tyres Rubber Powder Production Line, Tire Recycling Line, Whole Waste Tire Crusher Machine , Rubber Crumb Production Line, Waste Tyre Crumb Production Line ZPS-900
Advantage:
1. 5 years on tyre recycling machine manufacturing and exporting.
2. Delivery within 60 days.
3. Safety wood or plywood crates packing.
4. Full transportation insurance.
5. Sell to 126 countries on 6 continents.
6. One-stop rubber machinery solution in Qingdao Shun Cheong.
7. It has passed ISO9001: 2015 certificate.
Product Description
Use:
This machine can directly crush tires smaller than 800mm tires. At the general temperature, can be put directly crushed into 50x50 mm block, so the next rotating can grind into 10-30 meshes or wire and fiber separation equipment.
Feature:
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; Tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; Rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description: The tires of 800mm diameter and rubber ring can directly be broken into 50*50 mm of rubber block.
Notes for using whole tire shredder:
A. Inject gear oil into gearbox oil (hypoid gear oil), main bearings use calcium-based grease lubrication, three months after the operation of the machine, the oil should be replaced and clean the fuel tank. Since then change the oil once time every year.
B After deal with 3, 000 tons of waste rubber (in normal circumstances), the buyer should grind the blade cutting edge once time. The blades is the wear parts, the general service life is 5-6 years, when delivering the machine to the buyer, the shredder will be equipped with edge hardness layer patching material (electrodes).
Advantage:
1. 5 years on tyre recycling machine manufacturing and exporting.
2. Delivery within 60 days.
3. Safety wood or plywood crates packing.
4. Full transportation insurance.
5. Sell to 126 countries on 6 continents.
6. One-stop rubber machinery solution in Qingdao Shun Cheong.
7. It has passed ISO9001: 2015 certificate.
Product Description
Use:
This machine can directly crush tires smaller than 800mm tires. At the general temperature, can be put directly crushed into 50x50 mm block, so the next rotating can grind into 10-30 meshes or wire and fiber separation equipment.
Feature:
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; Tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; Rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description: The tires of 800mm diameter and rubber ring can directly be broken into 50*50 mm of rubber block.
Notes for using whole tire shredder:
A. Inject gear oil into gearbox oil (hypoid gear oil), main bearings use calcium-based grease lubrication, three months after the operation of the machine, the oil should be replaced and clean the fuel tank. Since then change the oil once time every year.
B After deal with 3, 000 tons of waste rubber (in normal circumstances), the buyer should grind the blade cutting edge once time. The blades is the wear parts, the general service life is 5-6 years, when delivering the machine to the buyer, the shredder will be equipped with edge hardness layer patching material (electrodes).
| No. | Name | Model | Qty. (Qty) | Motor Power (KW) |
| 1 | Single hook debeader | LSJ-1200 | 1 | 11 |
| 2 | Whole tyre cutter | QDJ-1200 | 1 | 5.5 |
| 3&4 | Whole tyre shredder(with conveyor) | ZPS-900 | 1 | 61.5 |
| 5 | Double Rolls Rubber Crusher | XKP-560 | 1 | 90 |
| 6 | Big conveyor equipment | BCL-8 | 1 | 2 |
| 7 | Small conveyor equipment | BCL-3 | 1 | 1.1 |
| 8 | Big Magnet separator | BMS22 | 1 | 2.2 |
| 9 | Small Magnet separator | SMS-1 | 1 | 1.1 |
| 10 | Big Shaking screen | BSS-8 | 1 | 7.5 |
| 11 | Small Shaking screen | SSS-3 | 1 | 3 |
| 12 | Fiber separator | FS110 | 1 | 5.5 |
| 13 | Fine Rubber Powder Pulverizing Machine | XJFS-420 | 1 | 29.25 |
| 14. | Vibrating screen | 1 | 0.75 |
