Audited Supplier
Flux hopper is installed on welding head while dedusting system is installed on welding main machine, motorized traveling along with welding main machine. There are four universal wheels fixed on the flux collection trolley bottom base, which is convenient for moving according to welding joint and main machine position at any time.
Before welding, turn on flux hopper feeding in switch, flux then transported by feeding in hose to welding joint bevel arc area to cover welding area, which to protect welding arc.
When welding, remaining flux fall into downside flux collection trolley while welding slag is filtered at the same time. Meanwhile, flux storage level detection function is on, when flux in hopper is insufficient, then starting recycling to inhale flux into hopper, which realizes cyclic utilization in flux.
This flux feeding recycling system avoids frequent flux feeding in and recycle manually, which saves time and ensures welding quality, improving pipe spool welding general efficiency. With trolley collecting welding flux and slag, it makes work site floor to be clean and reduces safety hazards. Also, the system has features of decent recycling effect, strong in working continuously, good dedusting function, etc, which guarantees effective welding flux dust and gas cleaning, reduces flux wastage, improving economic benefit.
Pipe Spool Fabrication Machines
| 1 | | Pipe Cutting& Beveling All-in-one Machine >Suitable for pipes not larger than 8",max.thickness:20mm >Cutting efficiency:100times/8hrs >PLC control with automatic measuring to guarantee the same processing cycle >Widely used for small bore C.S/S.S production lines |
| 2 | | High Speed Band-saw Cutting Machine >Three models available(16"type,24"type",48"type) >PLC system control;self-measuring function with precision:±0.5mm >Using hydraulic self-centering chuck >It only takes 6 minutes to cut a 24" pipe of 25mm thickness >Widely used for C.S/S.S production lines. |
| 3 | | High Speed CNC Pipe End Beveling Machine >Automatic self-centering chuck >Single V,double V,U type bevel >Can be matched with pipe end turning devic >High speed beveling:for example,it only takes 2.5minutes to get a 37.5 degree bevel for a S.S pipe end(diameter :610mm,thickness:25mm) >Several models available:16",24",32",48" |
| 4 | | Two / Multi- Axis CNC Flame/Plasma Cutting Machine >Five/multi-axis cutting machine can profile more complicated outlines with various bevel type >Standard machine suitable for pipes nor larger than 24'' |
| 5 | | Multi-function Pipe Fitting-up Station >Suitable for flange,elbow,tee,reducer to pipe and special T-joint fitting-up. >Light-duty type(manual) and heavy-duty type(motorized) are available. >Different types available, 8" type, 24" type, 32" type, 48" type, 60" type |
| 6 | | Automatic Pipe Welding Station >With two welding heads >TIG/MIG/SAW are optional >PLC system control & WPS programmed >Max. efficiency fo reach welding head can be 400D.I/8hrs even use TIG/MIG technology. >Different types available, 8" type, 24" type, 32" type, 48" type, 60" type |
| 7 | | Conveyor Handling System >used for pipe convenient transporation during in pipe spool fabrication. >Its speed is adjustable between 2M to 20M/min. |
For more information, please contact us, thank you!
