Audited Supplier
950mm
440 R/Min
0.1~5mm
0.01mm
156n.M
Max Flat Wire 3×12mm Round Wire 0.1mm~5mm
5kw
Automatic
CE, ISO
EN-SOURCE
Wooden Package
300-1300mm
China, Zhejiang
85041900
Product Description
Automatic Wire Guiding and Winding Machine for Transformer Coil
I.Machine Introduction:
Automatic Wire Guiding and Winding Machine is a new and practical model improved by our factory.
The complete machine has stable transmission, with neat wiring, low noise, convenient & flexible operation, frequency conversion control, stepless speed regulation and accurate counting. The wire guiding system adopts intelligent servo and the operation is controlled by the man-machine interface. This machine is an economical and practical product in similar products.
II.Main Technical Parameters
III.Machine other photo:
IV. Contact
I.Machine Introduction:
Automatic Wire Guiding and Winding Machine is a new and practical model improved by our factory.
The complete machine has stable transmission, with neat wiring, low noise, convenient & flexible operation, frequency conversion control, stepless speed regulation and accurate counting. The wire guiding system adopts intelligent servo and the operation is controlled by the man-machine interface. This machine is an economical and practical product in similar products.
II.Main Technical Parameters
| Item | Parameters |
| Center height | 950mm |
| Winding diameter (max.) | Ф600 mm |
| Winding width (max.) | ≤1000mm |
| Basic output shaft speed | 440 r/min |
| Stepping scope | 0.1~5mm |
| Stepping accuracy | 0.01mm |
| Counter maximum set number of turns | 9999.9 |
| Max. output torque | 156N.m |
| Maximum load | 500kg |
| Wire specifications | MAX Flat wire 3×12mm Round wire 0.1mm~5mm |
| Total weight | 1500kg |
| Power of motor | 5kw |
| Machine tool parts dimension (LxWxH) | 2250×1100×1630mm |
III.Machine other photo:
IV. Contact
