Audited Supplier
MQ-320D
After-Sale Services Available
Die Cutting and Creasing Machine
Platen
Horizontal
Steel Plate
Computerized
Automatic
Paper Packaging Materials, Stickers Products
7.5 Kw
About 1700 Kg
±0.10mm
Newsun
Export Wooden Case
CE
Ruian
84411000
Product Description
Automatically Sticker Roll To Roll Adehesive Label Laser Anti-Fales Label Die Cutting Machine
The main technical parameters
| Die Cutting Speed | 20-350times/min |
| Max.Web Width | 320mm |
| Max.Die Cutting Width | 320mm |
| Max.Die Cutting Length | 300mm |
| Max.Unwinding Diameter | 500mm |
| Max.Rewinding Diameter | 500mm |
| Fixing Precision | ±0.10mm |
| Positioning Prcission | 7.5 kw |
| Dimension(L*W*H) | 2700*1000*1500mm |
| Weight | About 1700 kg |
Features
This machine is suitable for die cutting paper label,dacron filmzlabel and laser anti-fales label.It is an ideal auxiliary machine for flexo printer,silk-screen printer,rotogravure printer and so on.Computer servo system pull paper feeding - die cutting - waste discharge - rewinding(or slicing). All processes is completed by computer in one time
Description of the main parts
Operation illustration
1.on the operation box there exists a "stop" button, when the button been pressed, but the green indicator light is still bright then the whole machine is without electricity. When need electricity, you should rotate according to the direction which the arrow on the switch button indicates, it can return the switch to electricity, press any place of the touch screen to enter work screen.
2.In the die-cutting machine schematic diagram,put on material as the picture shows, press "Click Through" "Click back"button on touch screen to put the material in suitable position of die cutting machine.
3.According to the function to set the "working speed" "length set" number of "warning" and "shut down times". At the same time set "work method" and "slice method" .
Material Roll System
The material roll system is mainly combined with material putting roller, transition roller, floating roller, switch and control board.
Release the material roller and put on material as the schematic diagram shows, put the material roller and adjust the Feeding displacement sensor to the lowest position the feeding will stop. In addition, you can control the intention and stability of the feeding by adjust the feeding frictional force.
EPC Control System
The system is combined with two photoelectric switch, synchronous motor, screw, sliding bearing and photoelectric frame.
The operation is on touch screen.
Die-cutting System
The die-cutting system is mainly combined with Base plate, mold plate, mold and impact plate.
Generally the upper base plate has been adjusted the position before they leave the factory, and four feet are fixed and do not need to be adjust. After the mould fixed on the mould plate, and then fixed on the upper base plate; If there is a trace of skew swash mark, you can loosen the set screw, adjust the mould screw from longitudinal Angle and fixed again. Big askew must reinstallation.
In order to ensure easy demoulding, you can appropriately stick some sponges which was slightly higher than the blunt knife surface in the gap in the mold. In order to ensure the surface of the impact plate is not damaged, stick some 1 mm organic plastic paste on the punching board face.
Not startup but have already put material, please shaking the host controller which will put impact plate to the highest level, adjust the impact plate adjust handwheel to make impact plate horizontal and in position.
According to swash mark and proper fine-tuning adjust the handwheel after startup, if it couldn't make swash mark even after adjusting, you can pasting the proper thickness and size small pieces of paper on correspond swash mark. Die cutting position, before and after the manual adjustment by moving drag photoelectric material, fine tuning is regulated by the handwheel longitudinal trimming; Manual horizontal adjustment by photoelectric mobile rectifier, fine-tuning by rectifying the handwheel adjustment.
It has been adjusted the CAM and the photoelectric switch position before they leave the factory, generally user can't change or remove.
Material-Pulling System
Mainly combined with material-pulling roller, pressure roller, synchronous belt wheel and slider.
When need to put material, you should pull press roller up and press press roller before start
The diffusion knife system mainly combined with the clutch, brake, and the corresponding eccentric mechanism, high position switch and cutter.
When need move the cutter, release the brake and actuation the clutch with the cutter to work. Then the brake and clutch work alternately as requires.
At the beginning,the diffusion knife should be empty cut first to find high position then officially start the feed and cutting.
Diffusion knife cutter location: the front and back of cutting position adjust comes true by use the handwheel to drive the rollers move up and down.
Winding and Scrap edgeWhen the scrap edge, put the scrap plate inside the waste paper tube and adjust the The friction of friction plate to get suitable stretched tension.
When the paper tube small, the friction is reduced. When the paper tube is larger, in order to keep the tension, you must increase the friction force.
When slicing, work bedpalte must be fixed firm, slicing number can be set to 1 to 99 and cut the number from 1-99 according to needs and move the diffusion knife.
If the final product needs to winding to put on the automatic labeling machine, bedplate should be demolition and closed cutter button (remember that no one shall be closed the cutter button during work), set the cut number to 0 and carry the diffusion knife to the high position where has the light. after fixed and put it on the cutter, it can be switched on continuous winding, the winding tension control is just like Scrap collection, the larger the tube is, the big the friction force will be.
Pre-sales issues
01. How to get in touch with us?
Call us directly
Direct to the company: National Road 104, Songqiao Industrial Zone, Wanquan Town, Pingyang County, Zhejiang Province, China
Direct to the company: National Road 104, Songqiao Industrial Zone, Wanquan Town, Pingyang County, Zhejiang Province, China
02. How to answer technical guidance?
For some customers who need non-standard equipment, we will communicate with the company's relevant technical personnel according to the customer's specific requirements, taking into account the technical feasibility and production costs, and give customers solutions.
03. How to recommend products?
We have nearly 14 products in four series. We can also provide non-standard equipment production and new product development services according to customer requirements. According to the customer's requirements to be produced, the purpose of the product to be purchased, the environment, the purchase volume and other related conditions, we will recommend several cost-effective products for the customer to choose.
04. How to make a quotation?
Based on our company's research and development costs, production costs and customer purchases, we conduct calculations to determine the price of the product.
Problems in sale
01. About payment
After signing the contract, 30% of the total payment will be paid in advance, and the factory will accept the payment and pay the full amount of the machine for delivery.
02. About delivery time
About 45 working days after receiving the deposit (non-standard machine), the factory will re-decide whether to change the delivery date when the order is confirmed. The standard machine is generally within 30 working days after receiving the deposit
03. Order tracking
After the customer places an order, our company will send professional personnel to track the order and regularly report the production progress to the customer. Customers can check the order status on the official website (delivery query).
04. Product testing
During the production process, our company will adopt strict inspection process to ensure product quality. Through internal inspection, we ensure that the components produced by our company meet the technical requirements; through external inspection, we ensure that the components produced by our company are not subject to quality problems; and then pass the whole machine inspection to ensure that the mechanical equipment meets the technical production requirements .
05. Product packaging
Before the product is shipped, it will be packed in a strict vacuum plus bottom tray (wooden tray or steel tray)
06. Product Transportation
Products are generally shipped from Ningbo Port, China to the destination port by sea.
After sales question
01. Shelf life/warranty period of the product
The product warranty period is generally one year, and our company provides lifetime maintenance services. If the machine has quality problems, our company will help the customer to solve it through the following ways: a. Send spare parts to the customer. b. Remotely assist customers in maintenance. c. Notify our agent company to send personnel to the customer's factory for maintenance. d. Our company directly dispatches relevant personnel to the customer's factory for maintenance.
02. About transportation damage
In the process of product transportation, if product damage occurs, it is determined that our product packaging and reinforcement work is not in place, and our company will bear the corresponding losses.
03. About machine maintenance
We will contact customers on a regular basis on how to maintain and maintain the machine. For domestic customers, we will have a master to provide on-site service.
04. Problems during use
If there is any problem in the process of using the product, the customer can directly call or send an email to our after-sales department (24-hour hotline). The personnel of our department will respond immediately and make a decision on the response measures within 24 hours.
