Audited Supplier
Custom
Silicone Rubber
Rubber Oil Hose
Black
as Per Drawing
Yes
20-85 Shore a
ISO9001, Ts16949
BRP or OEM
Polybag with Carton
customized
China
4009110000
Product Description
| Name | Rubber hose |
| Material | Silicone, EPDM, NR, NBR, FKM, SBR, HNBR, IIR, CR FFKM etc |
| Hardness | 20-85 Shore A, ± 5 Shore A |
| Temperature | -40°C to +125°C |
| Size | According to the drawing or sample |
| Color | According to your requirement (Panton color card) |
| Package | 1x Silicone Rubber |
Feature:
1. Non-toxic, environmental protection, high transparency, strong resilience.
2. Resistant to compression permanent deformation, UV resistance, flame retardant and other characteristics.
3. Hardness: the most soft silicone 50 ± 5 degrees, the most hard 80 ± 5 degrees.
4. Than ordinary rubber has much better heat resistance, can be used at 150 degrees almost always without performance changes.
5. Can be used at 200 degrees continuous use of 10,000 hours, 350 degrees can also be used for some time.
Typical areas of application:
- connecting elements
- noise insulation
- heating systems
- cooling systems
- air intake
- air distribution
- vibration insulation
- distribution systems for liquid and gaseous media
- fuel supply
FAQ
Q: Are you manufacturer or trading company?
A: We are manufacturer, engineer had rich experience over 20 years.
Q: How to get the quickest quotation?
A: Sending drawing, material, quantity and other rrequirements by email.
Q: How to get quotation without drawing?
A: Possible send sample, pictures or detail descriptions of products to us, we will return you drawing for confirm.
Q: I have an idea for a new product, but not sure if it can be manufactured. Can you help?A. Yes! We are always happy to work with potential customers to evaluate the technical feasibility of your idea or design and we can advise on materials, tooling and likely set-up costs.
Q: My custom products have already been developed on CAD. Can you use the drawings?
A. Yes! DWG, DXF, IGES, Solidworks and Rhino files can all be used to generate quotes, models and mould tools - this can save time and money in producing your parts.
Q: Can I test my idea/product before committing to mould tool manufacture?
A. Yes, we can use CAD drawings to make models for design and functional evaluations.
Q: What type of plastic/rubber material is best for my design/product?
A. Materials selection depends on the application of your design and the environment in which it will function. We will be happy to discuss the alternatives and suggest the best material.
Q: How to get sample?
A: Free sample is available for your quality evaluation, but you should pay the freight. Regarding customize products, sample and mould order will go first before mass production.
