Audited Supplier
XH-1600BOPP
on-Site Installation & Commissioning
1 Year
Roll Coater
Electric
Automatic
Wrapping Film
Pallet
Electronics, EVA, Fabric
Pet
1300/1600, etc
Sensor Tension Control
Double-Station Type
Double-Station Type
FURIMACH
Container
China, Anhui
847780000
Product Description
BOPP Coating Machine
Application: Suitable for producing BOPP adhesive packing tape rolls.
Application: Suitable for producing BOPP adhesive packing tape rolls.
Note: customizable
| Main features BOPP Coating Machine is a kind of "highly efficient, environmental protective, energy saving, low-energy consumption" coating machine with high-performance, manufactured by Anhui Furi Intelligent Equipment Co., LTD. It consists of unwinding unit, pulling unit, coating unit, drying unit, humidifying unit, cooling unit, rewinding unit, control unit and corresponding control instruments, etc. | |
| Machine Composition | |
| Unit | Qty |
| Double-station unwind | 1 set |
| Mayer bar coating head | 1 set |
| Drying unit | 4m/section, 56m in total (based on customer) |
| Cooling unit | 1 set |
| Humidifying unit | 1 set |
| Double-station rewind | 1 set |
| Electrical control system | 1 set |
| Main Technical Parameters | |
| Machine speed | 0~360m/min, designable |
| Coating speed | Max. 350m/min, actual coating speed depends on properties and thickness uniformity of substrate used, properties of solvent, amount of coating on the coating plate, coating property, etc. |
| Substrate width | Max. 1600mm |
| Substrate | BOPP raw film |
| Coating type | Mayer bar coating |
| Oven length | 4m/section, designable |
| Heating type | Electricity, natural gas, thermal oil, steam, etc. |
| Temperature control precision | ±2ºC |
| Max. heating temperature | 110ºC |
| Required compressed air | Filtration and cleaning (remove oil & moisture) treatment. Min. pressure 6kg/cm2. |
| Tension control range | 3~30KG (whole web load) |
| Tension controlled precision | ±0.2KG (whole web precision) |
| Substrate roll inner diameter | Unwind 3", rewind 3", designable |
| Guide roller effective width | 1750mm |
| Unwind diameter | Max.φ800mm |
| Rewind diameter | Max.φ800mm (double-station rewinding) |
| Motor voltage | 380VAC, 3P ±7%, 50HZ±2% |
| Control voltage | 220VAC, 1P ±7%, 50HZ±2% |
| Machine color | RAL color system |
| Total weight: | Subject to final design |
Pictures
