Audited Supplier
HDGC3932
1 Year
Storage Battery Tester
Charge and Discharge
Lead-acid Battery
Customized
2V, 6V, 12V
1.5V -16V
2V 100A. 6V 60A. 12V 30A
RS485 or USB
SD 8g
HD Power
Wooden Box with Foam Inside
Made in China
9030899090
Product Description
HD3932 Discharge and Charge Tester for Cell Battery
General Information
HDGC3932 Battery charge and discharge tester is used to discharge and charge and activate for disable single cell battery, which is simple, safe and accurate test device.The instrument is with perfect protection function, sound and light alarm and clear interface tips.
Features
General Information
HDGC3932 Battery charge and discharge tester is used to discharge and charge and activate for disable single cell battery, which is simple, safe and accurate test device.The instrument is with perfect protection function, sound and light alarm and clear interface tips.
Features
- Adopt PTC ceramic resistor in avoid red-hot phenomenon to make the whole discharge process safer.
- Record total voltage and discharge current and analyze date to form data report equipped with PC software. It can display the curve and figures of storage battery group capacity performance, print and search the data .
- With USB interface, it can transmit the data during the discharging to PC by USB
- It is more convenient to analyze and record the data which is measured during the discharge.
- With intelligent SCM ARM control, 7 inch 1024*600 high-definition LCD display, capacitive touch operation. It is easy to operate built-in Chinese and English menu.
- Auto emergency stop protection, over-heat protection, over-voltage protection , over-current protection and reverse polarity protection. Display the alarm tip and automatically turn off air circuit breaker .
- Set the stop condition of charge and discharge including battery voltage , charge current, the time of charge/discharge and capacity of charge/discharge. It will automatically stop the measurement with a buzzing sound and record the stop reason once it exceeds the any setting value.
- Remote control the function of charge ,discharge and activation
- Charging, discharging and activation integrated, one machine multi-purpose;
| Suitable Battery | DC 2V/6V12V |
| Charge and discharge voltage | DC1.5-16V |
| Charge and discharge current | 2V 100A ; 6V 60A; 12V 30A Constant current continuously adjust |
| Working mode | Single machine mode, parallel machine host mode, parallel machine slave mode, remote control mode |
| Over-protection | Over-voltage protection ,under-voltage downtime, reverse connection protection , over- temperature 65ºC with LDC display and buzzing alarm |
| Control Accuracy | Discharge current ±1%; Group voltage ≤±0.1% |
| PC | RS485 and USB interface |
| Data storage capacity | Built-in SD 8G; U disk 16G |
| Working Environment | |
| Cooling | Forced cooling |
| Temperature | Working temperature: -5~50ºC storage temperature: -40~70ºC |
| Humidity | Corresponding humidity:0~90%(40±2ºC) |
| Altitude | Altitude 4000m |
| Noise | <75dB |
| Working power supply | |
| Voltage | Working power supply: single phase AC220V(-30%~+20%)Frequency :45~65Hz; |
| Insulation Test | Input-host shell: 2200Vdc 1min Input -output: 2200Vdc 1min Output-host shell: 700Vdc 1min |
| Safety | Meet the standard EN610950 |
