Audited Supplier
BODA-Graval pump
1 Years
1 Years
as You Requested
as You Requested
as You Requested
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Open
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
All
Many Type
Boda
Cr27
boda
Wooden Case
As you requested
Shijiazhuang, Hebei
8413709990
Product Description
BHR Rubber Slurry Pump
Name: BHR Rubber Slurry Pump
Pump Type: Centrifugal
Power: Motor/Diesel
Discharge Size: 1-18 inch
Capatiy:0-1000(l/s)
Head:0-70m
Description:
BH(R) series centrifugal slurry pumps and spare parts can fully interchage with world famous brand.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and impellers, which are all interchangeable within a common costing assembly.
Typical Application:
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand and Gravel Handling
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
Structure Drawing:
Pump Type: Centrifugal
Power: Motor/Diesel
Discharge Size: 1-18 inch
Capatiy:0-1000(l/s)
Head:0-70m
Description:
BH(R) series centrifugal slurry pumps and spare parts can fully interchage with world famous brand.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and impellers, which are all interchangeable within a common costing assembly.
Typical Application:
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand and Gravel Handling
Horizontal Centrifugal Slurry Pump
1. Durable slurry pump used for mines and industry solids pumping.
2. Wearing parts are made of Anti-abrasive ultral Cr alloy or rubber.
3. Slurry pump drive module design which makes the spare parts can be changed easily
4. Designed and built for long time with low maintenance for the Heavy brand slurry pump
5. Equipped the electric motor or diesel engine with slurry pump according to your requirement
6. Long service life for the wet parts of slurry pump.
The Features:
1. The wet parts for slurry pump are made of wear-resistant chromium alloy.
2. Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, frequency conversion drive devices for the slurry pump.
6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.
Structure Drawing:
| Pump Model | Allowable Max. Power(kw) | Clear Water Performance | ||||||
| capacity Q | Head H(m) | speed n(r/min) | Max.eff. η% | NPSH (m) | Impeller Dia(mm) | |||
| m3/h | l/s | |||||||
| 1.5/1B-BHR | 15 | 10.8-25.2 | 3-7 | 7-52 | 1400-3400 | 35 | ||
| 2/1.5B-BHR | 15 | 25.2-54 | 7-15 | 5.5-41 | 1000-2600 | 50 | 2.5-5.5 | 178 |
| 3/2C-BHR | 30 | 36-75.4 | 10-21 | 13-39 | 1300-2100 | 2-4 | 213 | |
| 4/3C-BHR | 30 | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3-5 | 245 |
| 4/3D-BHR | 60 | |||||||
| 6/4D-BHR | 60 | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3-5 | 365 |
| 6/4E-BHR | 120 | |||||||
| 8/6E-BHR | 120 | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 510 |
| 8/6R-BHR | 300 | |||||||
| 10/8ST-BHR | 560 | 540-1188 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | |
| 12/10ST-BHR | 560 | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | |
| 14/12ST-BHR | 560 | 1152-2520 | 320-700 | 13-14 | 300-500 | 79 | 3-8 | |
| 16/14TU-BHR | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 1067 |
